EXPERIMENTAL STUDY OF SUSPENDED INSULATORS USING OF ALUMINOUS PORCELAIN

  • Dr. S. K. Mahobia Assistant Professor, Department of Physics, Rewa Engineering College, Rewa (M.P.), India
  • Prof. G.R.Kumrey Assistant Professor, Department of Electrical Engg., Rewa Engineering College, Rewa (M.P.), India
Keywords: Experimental Process, Various Loads, Suspended Insulators

Abstract

In this paper, we are studying about insulators which are used in transmission line, distribution line, power station. the best performance of the insulator during various load are achieving , the various load such as 500 Watts, 1000Watts 1500Watts, 2000Watts, 2500 watts during time. The insulator are mounted on the upper surface of pin and attached with power supply.

Downloads

Download data is not yet available.

References

Chandrasekar S, Kalaivanan C, “Partial discharge detection as a tool to infer pollution severity of polymeric insulators”, IEEE Trans.

E.A. Cherney and J.T. Burnham, “Outdoor Insulators”, Ravi S.Gorur, Inc., Phoenix, Arizona

J.S.T. Looms, “Insulators for high voltages”, IEE series, 1990.

Licheng Li and Yuming Zhao, IEEE Trans. Dielectrics and Electr. Insul., vol. 19, no. 3, pp. 1053- 1059.

Qin Hu, Fanghui Yin, “Effect of ultrasonic fog on AC flashover voltage of polluted porcelain and glass insulators”, IEEE Trans. Dielectrics and Electr.Insul., vol.20, no.2, pp. 429-434. DOI: https://doi.org/10.1109/TDEI.2013.6508744

Published
2017-10-31
How to Cite
Mahobia, S., & Kumrey, G. (2017). EXPERIMENTAL STUDY OF SUSPENDED INSULATORS USING OF ALUMINOUS PORCELAIN . International Journal of Engineering Technologies and Management Research, 4(10), 109-113. https://doi.org/10.29121/ijetmr.v4.i10.2017.111

Most read articles by the same author(s)