CAVITATION FUSION BY ENERGY-INTENSIVE MULTIFUNCTION CAVITATION IN A STRONG MAGNETIC FIELD WITH LASER LIGHT EXCITATION

Toshihiko Yoshimura

doi:10.29121/ijoest.v7.i2.2023.492

Authors

Toshihiko Yoshimuraa Department of Mechanical Engineering, Sanyo-onoda City University, 1-1-1 Daigakudori, Sanyo-Onoda, Yamaguchi 756-0884, Japan

DOI:

https://doi.org/10.29121/ijoest.v7.i2.2023.492

Keywords:

Cavitation Fusion, Multifunction Cavitation, Laser Light Excitation

Abstract

This paper introduces an experimental apparatus capable of producing cavitation fusion based on laser-assisted high-magnetic-field energy-intensive multifunction cavitation. Combining water jet, ultrasonic and magnetic field energy sources has been shown to increase the luminescence intensity in this system such that the threshold required for deuterium-tritium fusion can be exceeded. The incorporation of a laser provides a further improvement in emission intensity based on an increase in the internal temperature of bubbles. Multiphoton excitation induced by the laser irradiation raises the pressure generated during collisions between bubbles. Consequently, the probability of achieving cavitation fusion is greatly enhanced.

Downloads

Download data is not yet available.

References

Ijiri M., Ogi T., Murakami K., Horiguchi S. & Yoshimura T. (2022a). Effect of Multifunction Cavitation Treated Carbon Steel Surface on Fracture Toughness. Journal of Materials Research and Technology, 19, 3546-3553. https://doi.org/10.1016/j.jmrt.2022.06.117

Ijiri M., Okamoto N., Okamoto S., Ogi T., Kikuchi S. & Yoshimura T. (2022b). Characteristics of Oxide Film Formed on Cavitation-Treated Steel Surface in Water. Journal of Materials Research and Technology, 19, 1897-1905. https://doi.org/10.1016/j.jmrt.2022.05.182

Ijiri M., Yamaguchi K., Kikuchi S., Fujiwara M., Nakanishi Y. & Yoshimura T. (2021a). Improvement in the Quality of the Processed Material Surfaces Lies in the Moving of Nozzle in the Cavitation Processing. Surfaces and Interfaces, 25(101206), 1-8. https://doi.org/10.1016/j.surfin.2021.101206

ljiri M., Kato F., Maeda D., Shimonishi D. & Yoshimura T. (2021b). Effect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation Processing. Materials Science Forum, 1016, 574-579. https://doi.org/10.4028/www.scientific.net/MSF.1016.574

Seife C. (2002). Bubble Fusion Paper Generates a Tempest in a Beaker. Science, 295, 1808-1809. https://doi.org/10.1126/science.295.5561.1808

Taleyarkhan R.P. et al. (2002). Evidence for Nuclear Emissions During Acoustic Cavitation. Science, 295, 1868-1873. Retrieved from https://doi.org/10.1126/science.1067589

Yoshimura T., Noda T., Ijiri M. & Ota S. (2023). Processing of Magnesium Alloy by Energy-Intensive Multifunction Cavitation in a Strong Magnetic Field with Laser Light Excitation and Associated Sonoluminescence. Results in Materials, 18:100391, 1-11. https://doi.org/10.1016/j.rinma.2023.100391

Yoshimura T., Fujinaga S. & Ijiri M. (2022a). Modifying Resin Viscoelasticity by Multifunction Cavitation Processing in a Magnetic Field. International Journal of Engineering Science Technologies, 6(4), 1-10. https://doi.org/10.29121/ijoest.v6.i4.2022.364

Yoshimura T., Watanabe S., Ijiri M. & Ota S. (2022b). Development of Processing Technology Using Extremely High Concentration Cavitation Energy by Strong Magnetic Field. Results in Materials, 14:100289, 1-11. https://doi.org/10.1016/j.rinma.2022.100289

Yoshimura T., Ijiri M. & Sato K. (2021a). Estimation of Nuclear Fusion Requirements in Bubbles During Ultra-High-Pressure, Ultra-High-Temperature Cavitation Promoted by Magnetic Field. International Journal of Engineering Science Technologies, 5(6), 102-115. https://doi.org/10.29121/ijoest.v5.i6.2021.257

Yoshimura T., Sugae Y., Ogi T., Kato F. & Ijiri M. (2021b). Development of Energy Intensive Multifunction Cavitation Technology and its Application to the Surface Modification of the Ni Based Columnar Crystal Superalloy CM186LC. Heliyon, 7(12), 1-11. https://doi.org/10.1016/j.heliyon.2021.e08572

Yoshimura T., Nishijima N., Hashimoto D. & Ijiri M. (2021c). Sonoluminescence from Ultra-High Temperature and Pressure Cavitation Produced by a Narrow Water Jet. Heliyon, 7(8), 1-8. https://doi.org/10.1016/j.heliyon.2021.e07767

Yoshimura T., Iwamoto M., Ogi T., Kato F., Ijiri M. & Kikuchi S. (2021d). Peening Natural Aging of Aluminum Alloy by Ultra-High-Temperature and High-Pressure Cavitation. Applied Sciences, 11(2894), 1-13. https://doi.org/10.3390/app11072894

Yoshimura T., Shimonishi D., Hashimoto D., Nishijima N. & Ijiri M. (2021e). Effect of Processing Degree and Nozzle Diameter on Multifunction Cavitation. Surface Engineering and Applied Electrochemistry, 57(1), 101-106. https://doi.org/10.3103/S1068375521010154

Yoshimura T. (Inventor), Assignee: Sanyo-Onoda City Public University, Patent No.: US 10,590,966 B2, Date of Patent: Mar. 17, 2020, Method for Generating Mechanical and Electrochemical Cavitation, Method for Changing Geometric Shape and Electrochemical Properties of Substance Surface, Method for Peeling off Rare Metal, Mechanical and Electrochemical Cavitation Generator, and Method for Generating Nuclear Fusion Reaction of Deuterium, International PCT Pub. No.: W02016/136656, PCT No.: PCT/JP2016/055016.

Yoshimura T., Yoshiya H., Tanaka K. & Ijiri M. (2018a). Estimation of Bubble Fusion Requirements During High-Pressure, High-Temperature Cavitation. International Journal of Advancements in Technology, 9(3), 1-9. 1000206. https://doi.org/10.4172/0976-4860.1000206

Yoshimura T., Yoshiya H., Tanaka K. & Ijiri M. Estimation of Bubble Fusion Requirements During High-Pressure, High-Temperature Cavitation. The 21st International Conference for Condensed Matter Nuclear Science, 3 - 8 June (2018b), Fort Collins, CO, USA. https://doi.org/10.4172/0976-4860.1000206