• Toshihiko Yoshimura Department of Mechanical Engineering, Sanyo-onoda City University, 1-1-1 Daigaku-dori, Sanyo-Onoda, Yamaguchi 756-0884 Japan
  • Seijiro Fujinaga Department of Mechanical Engineering, Sanyo-onoda City University, 1-1-1 Daigaku-dori, Sanyo-Onoda, Yamaguchi 756-0884 Japan
  • Masataka Ijiri Department of Mechanical Systems Engineering, Tokyo Metropolitan University Minami-Osawa, Hachioji, Tokyo 192-0397, Japan



Magnetic Field Multifunction Cavitation, Polyamide, Viscous Elasticity


The viscoelastic properties of polyamide 11 samples were modified by subjecting these specimens to multifunction cavitation within a magnetic field, using a device equipped with a 0.1 mm water jet nozzle. During these trials, a magnetic field was applied to the entire water jet stream while varying the distance between the nozzle and the specimen. The effects of various processing conditions were assessed by monitoring the removal of ink applied to sample surfaces. The results obtained using this technique with and without a magnetic field were also evaluated.


Download data is not yet available.


Agarwal, A. Ng, W. J. Liu, Y. (2011). Principle and applications of micro bubble and nano bubble technology for water treatment. Chemosphere, 84(9), 1175-1180.

Atchley, A. (1989). The Blake threshold of cavitation nucleus having a radius-dependent surface tension, 85(1), 152-157.

Gompf, B. Gunther, R. Nick, G. Pecha, R. Eisenmenger, W. (1997). Resolving sonoluminescence pulse width with time-correlated single photon counting. 79, 1405-1408.

Ito, Y. Hasuda, H. Sakuragi, M. Tsuzuki, S. (2007). Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling. Acta Biomaterialia, 3, 1024-1032.

Kling, C. L. (1970). A High speed photographic study of cavitation bubble collapse. University Michigan Report No.

Nagata, Y. Watanabe, Y. Fujita, S. Dohmaru, T. Taniguchi, S. (1992). Formation of colloidal silver in water by ultrasonic irradiation. Journal of the Chemical Society, Chemical Communications, 21, 1620-1622.

Okoshi, M. Murahara, M. (1998). Area-selective nucleation of copper on fluorocarbon-resin surface using ArF excimer laser-induced chemical modification. Applied Physics Letters, 72(20), 2616-2618.

Plesset, M. W. (1949). The dynamics of cavitation bubbles. Journal of Applied Mechanics, 16277-16282.

Rayleigh, L. (1917). On the pressure developed in a liquid during the collapse of a spherical cavity. Philosophical Magazine, 34(200), 94-98.

Sato, Y. Murahara, M. (2012). Protein adsorption on PTFE surface 1nodified by ArF exci1ner laser treatment. Journal of Adhesion Science and Technology, 18(3), 1545-1555.

Summers, D. (1987). Consideration in the design of a waterjet device for reclamation of missile casings. Proc of the 4th U.S. Water Jet Conference, The University of California, Berkeley, 82-89.

Yoshimura, T. Ijiri, M. Sato, K. (2021e). Estimation of Nuclear Fusion Requiremensts in Bubbles During Ultra-high-pressure, Ultra-high-temperature Cavitation Promoted by Magnetic Field. International Journal of Engineering Science Technologies, 5(6), 102-115.

Yoshimura, T. Iwamoto, M. Ogi, T. Kato, F. Ijiri, M. Kikuchi, S. (2021a). Peening Natural Aging of Aluminum Alloy by Ultra-High-Temperature and High-Pressure Cavitation. Applied Sciences, 11(2894), 1-13.

Yoshimura, T. Nishijima, N. Hashimoto, D. Ijiri, M. (2021c). Sonoluminescence from ultra-high temperature and pressure cavitation produced by a narrow water jet. Heliyon, 7(8), 1-8.

Yoshimura, T. Shimonishi, D. Hashimoto, D. Nishijima, N. Ijiri, M. (2021d). Effect of Processing Degree and Nozzle Diameter on Multifunction Cavitation. Surface Engineering and Applied Electrochemistry, 57(1), 101-106.

Yoshimura, T. Sugae, Y. Ogi, T. Kato, F. Ijiri, M. (2021b). Development of energy intensive multifunction cavitation technology and its application to the surface modification of the Ni-based columnar crystal superalloy CM186LC.

Yoshimura, T. Tanaka, K. Ijiri, M. (2018b). Nanolevel surface processing of fine particles by waterjet cavitation and multifunction cavitation to improve the photocatalytic properties of titanium oxide.

Yoshimura, T. Tanaka, K. Yoshinaga, N. (2016). Development of mechanical-electrochemical cavitation technology, Journal of jet flow engineering, 32, 10-17.

Yoshimura, T. Tanaka, K. Yoshinaga, N. (2018a). Nano-level Material Processing by Multifunction Cavitation. Nanoscience & Nanotechnology-Asia, 8(1), 41-54.

Yoshimura, T. Watanabe, S. Ijiri, M. Ota, S. (2022). Development of processing technology using extremely high concentration cavitation energy by strong magnetic field. Results in Materials, 14, 1-11.




How to Cite

Yoshimura, T., Fujinaga, S. ., & Ijiri, M. (2022). MODIFYING RESIN VISCOELASTICITY BY MULTIFUNCTION CAVITATION PROCESSING IN A MAGNETIC FIELD. International Journal of Engineering Science Technologies, 6(4), 53–65.