EFFECT OF REPLACING SHARP SAND WITH STONE DUST AS FINE AGGREGATE IN CONCRETE

  • Ubi Stanley Emmanuel Department of Civil Engineering, Cross River University of Technology, Calabar
Keywords: Stone, Dust, Concrete, River, Slump

Abstract

Concrete is very variable material, having a wide range of strengths and stress-strain curve. Concrete composite material whose basic properties   are   related to the characteristic of constituent element, especially the aggregate. This research aimed to investigate the effect of replacing sharp sand with stone dust as an alternative to only river sand. Sieve analysis was carried out on the aggregate to determine the size of particle distribution. Slump test was carried out to compare the batches of concrete for the grade, water content between batches of concrete and amount of aggregate. Compressive strength test was carried out on concrete cubes made from sharp sand and   concrete   cubes   made   from replacement of sharp sand with stone dust also concrete made from ordinary stone dust at constant of free water/cement ratio 0.5. To check the properties of concrete produced with different materials, the tests were done for 7, 14, 21 and 28 days. The result obtained indicated that the strength of using sharp sand with stone dust in concrete production was higher than the strength of stone dust in concrete also higher than the strength of using sharp sand in concrete.

Downloads

Download data is not yet available.

References

Agbede, A. J. (2002) Suitability of Quarry Dust as Partial Replacement for sand in Hollow Block, Nse Technical Journal, Vol. 46, No., pp22 -28.

British Standard Institution BS 882, Part 2: 1973. Coarse and Fine aggregate from National Sources, London.

Ducatz, E. L. (1995) Effective use of Aggregate Fine ICAR 3rd Annual Symposium.

Fowler, D. W. and Constantino, G. A. (1997) International Research on Firms in Concrete, ICAR 5th Annual Symposium.

Nagaraji, T. S. and Zahida B. (1999), Efficient Utilization of Rock Dust and Pebbles as Aggregate in Portland Cement Concrete, The Indian Concrete Journal, Vol 70, No. 1, pp 1-4.

Neville, A. M. (2003). Properties of Concrete 4thEdn. Pearson Education.

Owoiabi, A. O. (1996), Use of Locally Available Fine and Coarse aggregate, Using Laterite as an Admixture, Nse Technical Journal, Vol. No. 5, pp. 45 -47.

Pofale, A. D. and Kulkarni, S. S. (1998) Comparative Study of Strength Properties of Concrete Mixes with Natural Sand replaced fully or partially be crushes stone powder (Basalt) from aggregate crushing waste, National Seminar on Advances on special concretes, Indian Concrete institute, Bang, Love, Indian, pp 227 -240.

Prakash, D. S. and Kumar, V. C. (2004), Investigations on Concrete using Stone waste as fine Aggregate for Concrete. The Indian concrete Journal, Vol. 7p. 45 - 49.

Ubi S. E., Nkra P.O., Agbor R.B., Ewa D.E. and Nuchal M (2020). Efficacy of basalt and granite as coarse aggregate in concrete mixture, International Journal of Engineering Technologies and Management Research, 7(9): 1-9. DOI: https://doi.org/10.29121/ijetmr.v7.i9.2020.769

Published
2021-04-19
How to Cite
Ubi, S. E. (2021). EFFECT OF REPLACING SHARP SAND WITH STONE DUST AS FINE AGGREGATE IN CONCRETE. International Journal of Engineering Science Technologies, 5(2), 105-123. https://doi.org/10.29121/ijoest.v5.i2.2021.176