MATHEMATICAL MODELING AND SENSITIVITY ANALYSIS OF LINEAR CONSECUTIVE 2:3:: G SYSTEM

Mamta Oberoi

doi:10.29121/shodhkosh.v5.i6.2024.3441

Authors

Dr. Mamta Oberoi Associate Professor, MLN College, Yamunanagar, Haryana

DOI:

https://doi.org/10.29121/shodhkosh.v5.i6.2024.3441

Keywords:

MTSF, Sensitivity Analysis, RPGT, Availability Analysis

Abstract [English]

In this paper, reliability modelling and sensitivity analysis are applied to two of the three cold standby systems, an external supporting system with preventive maintenance, and a single server that is susceptible to failure. Two of the three units are used in this study so that the system is functioning at its most efficient level when all three are in use. A faultless switchover mechanism helps turn on the third unit, which is in cold standby mode. These online and offline units are operated by the supporting system, which also manages a repair facility with a model for dependability performance measurements and supervises preventative maintenance for all kinds of units. Regarding the starting and base states, a large number of primary, secondary, and tertiary circuits, base states, and simple paths are provided. RPGT is used to represent four reliability measures with various path probabilities, transition probabilities, mean sojourn periods, and expressions, maintaining one of the facility unit failure or repair rates while altering the other. After that, sensitivity analysis is carried out by making the relevant tables and graphs and having a conversation.

References

Komal, S., P. and Kumar, D. (2009). RAM analysis of the press unit in a paper plant using genetic algorithm and lambda-tau methodology. In Proceeding of the 13th online International Conference (WSC ’08), (Springer Book Series), 127–137. DOI: https://doi.org/10.1007/978-3-540-89619-7_13

Kumar, A. Garg, D. and Goel, P. (2019). Mathematical modelling and behavioural analysis of a washing unit in paper mill. International Journal of System Assurance Engineering and Management, 10, 1639-1645. DOI: https://doi.org/10.1007/s13198-019-00916-4

Jieong, S., Hasegawa, S., Shimoyama, and Obayashi, S. (2009). Development and investigation of efficient GA/PSO-hybrid algorithm applicable to real-world design optimization. IEEE Computational Intelligence Magzine, 4, 36-44. DOI: https://doi.org/10.1109/MCI.2009.933099

Kumar, A., Goel, P. and Garg, D. (2018). Behaviour analysis of a bread making system. International Journal of Statistics and Applied Mathematics, 3(6), 56-61.

Anchal, Majumder A, Goel P (2021) Irregular Fluctuation of Successive SW Release Models. Design Engineering, 7, 8954-8962.

Bhunia, A. K., Sahoo, L., and Roy, D. (2010). Reliability stochastic optimization for a series system with interval component reliability via genetic algorithm. Applied Mathematics and Computation, 216(3), 929-939 DOI: https://doi.org/10.1016/j.amc.2010.01.106

Malik, S., Verma, S., Gupta, A., Sharma, G., and Singla, S. (2022). Performability evaluation, validation and optimization for the steam generation system of a coal-fired thermal power plant. Methods, 9, 1-14. DOI: https://doi.org/10.1016/j.mex.2022.101852

Kumari S, Khurana P, Singla S (2021) Behaviour and profit analysis of a thresher plant under steady state. International Journal of System Assurance Engineering and Man., 1-12. DOI: https://doi.org/10.1007/s13198-021-01183-y

Kumar, A., Goel, P., Garg, D., and Sahu A. (2017). System behaviour analysis in the urea fertilizer industry. Book: Data and Analysis communications in computer and information Science, 1, 3-12. DOI: https://doi.org/10.1007/978-981-10-8527-7_1