MECHANICAL BEHAVIORS OF BANANA AND SISAL HYBRID COMPOSITES REINFORCED USING OF VARIOUS PARAMETER

  • Hemant Patel PG Student, Department of Mechanical Engineering, Nri Institute of Information Science & Technology, Bhopal (M.P.), INDIA
  • Prof. Ashish Parkhe Associate Professor, Department of Mechanical Engineering, Nri Institute of Information Science & Technology, Bhopal (M.P.), INDIA
  • Dr P.K. Shrama Associate Professor, Department of Mechanical Engineering, Nri Institute of Information Science & Technology, Bhopal (M.P.), INDIA
Keywords: Banana, composites, sisal, resin

Abstract

To develop and commercialize materials containing vegetal fibers has grown in order to reduce environmental impact. Large amounts of lignocellulosic materials are generated around the world from several human activities and some process. Development of the Polymer Composites with natural fibers and fillers such as a sustainable alternative material for some applications, particularly in aerospace applications and automobile applications are being investigated. Natural fiber composites such as sisal, jute, hemp and coir polymer composites appear more attractive due to their higher specific strength, lightweight and biodegradability and low cost.

Downloads

Download data is not yet available.

References

Haris M.R.H.M., Noorsal K., The Preparation and Characterization of Esterified Banana Trunk Fibers/Poly(vinyl alcohol) Blend Film, Polymer-Plastics Technology and Engineering; 2010; 49(13): 1378-1384. DOI: 10.1080/03602559.2010.512324. DOI: https://doi.org/10.1080/03602559.2010.512324

Mohanty S., Nayak S.K., Effect of Mercerized Banana Fiber on the Mechanical and Morphological Characteristics of Organically Modified Fiber-Reinforced Polypropylene Nanocomposites, Polymer-Plastics Technology and Engineering; 2011; 50(14):1458- 1469. DOI: 10.1080/03602559.2011.593079. DOI: https://doi.org/10.1080/03602559.2011.593079

Mishra S., Studies on Electrical Properties of Natural Fiber: HDPE Composites, Polymer-Plastics Technology and Engineering;2005; 44(4): 687-693. DOI: 10.1081/PTE-200057818 DOI: https://doi.org/10.1081/PTE-200057818

Elayaperumal A, Sathiya GK, Prediction of tensile properties of hybrid-natural fiber composites. Composites: Part B;2012;43(2):793–796 DOI: https://doi.org/10.1016/j.compositesb.2011.08.023

K.N. Indira, Jyotishkumar Parameswaranpillai, and Sabu Thomas, (2013) Mechanical properties & Failure topography of banana fiber, Hindawi publishing corporation, ISRN Polymer science. DOI: https://doi.org/10.1155/2013/936048

D. Chandramohan & .K. Marimuthu,( 2011).A Review on natural fibers, IJRRAS 8(2).

N. Venkateshwaran, A. ElayaPerumal ,A. Alavudeen M. Thiruchitrambalam. Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites 32 (2011) 4017-4021.

Leandro José da Silva, Túlio Hallak Panzera ,Vânia Regina Velloso , André Luis Christoforo ,Fabrizio Scarpa, Hybrid polymeric composites reinforced with sisal fibres and silica microparticles. Composites: Part B 43 (2012) 3436–3444. DOI: https://doi.org/10.1016/j.compositesb.2012.01.026

Kai Yang , Mingyuan Gu, Enhanced thermal conductivity of epoxy nanocomposites filled with hybrid filler system of triethylenetetramine-functionalized multi-walled carbon nanotube/silane-modified nano-sized silicon carbide. Composites: Part A 41 (2010) 215– 221. DOI: https://doi.org/10.1016/j.compositesa.2009.10.019

Se Young Kim ,In Sub Han ,Sang Kuk Woo, Kee Sung Lee ,Do Kyung Kim. Wearmechanical properties of filler-added liquid silicon infiltration C/C–SiC composites. Materials and Design 44 (2013) 107–113.

M.Ramesha, K.Palanikumar, K.Hemachandra Reddy. Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites. Procedia Engineering 51 (2013) 745 – 750.

R. Velmurugan, V. Manikandan, Mechanical properties of palmyra/glass fiber hybrid composites. Composites: Part A 38 (2007) 2216–2226. DOI: https://doi.org/10.1016/j.compositesa.2007.06.006

Published
2016-01-31
How to Cite
Patel, H., Parkhe, A., & Shrama, P. (2016). MECHANICAL BEHAVIORS OF BANANA AND SISAL HYBRID COMPOSITES REINFORCED USING OF VARIOUS PARAMETER. International Journal of Engineering Technologies and Management Research, 3(1), 1-4. https://doi.org/10.29121/ijetmr.v3.i1.2016.37