MACHINABILITY OF MATERIALS AND THEIR MATHEMATICAL MODELS FROM AN ECONOMIC POINT OF VIEW

  • Darina Matisková Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Department of Industrial Engineering and Informatics, Bayerova 1, 08001 Presov, Slovac, Republic
Keywords: Minimization of Costs, Machine Serviceability, Production of Cost, Economic Reasons, Optimizing

Abstract

This article is about the economics aspects on optimization of components production are nowadays very current issue. Article is about the criteria of economic efficiency of production of mechanical components for machine tools and CNC machines. The machinability of materials is considered to be a parameter which characterizes the machined material in the process of cutting and expresses the degree of machining effectivity in terms of material of a product and is expressed by mathematical model.

Downloads

Download data is not yet available.

References

BERGELIS, A.: Impact of collaborative manufacturing engineering on production variety and efficiency. 10th International Conference: New Ways in Manufacturing Technologies, 2010, Prešov, pp. 95-102, ISBN 978-80-553-0441-0

HIRANO, H.: 5 Pillars of the visual workplace. Productivity Press, Portland, Oregon, 1998.

HOSHI, T.: High productivity machining research in Japan. Journal of Applied Metal, Working 4 (3), 1986, pp. 226-237 DOI: https://doi.org/10.1007/BF02833930

HRUBINA, K.., SEBEJ, P.: Methods of artificial intelligence for solution of selected tasks of technological processes optimisation in: Manufacturing engineering. Vol. 7, no. 4 (2008), pp. 64- 67. - ISSN 1335-7972

LUXHOJ, J, T., RISS, J, O., THORSTEINSSON, U.: Trends and perspectives in industrial Maitenance Management. Journal of Manufacturing Systems vol. 16, 6/1997 DOI: https://doi.org/10.1016/S0278-6125(97)81701-3

MÁDL, J.: Computer – Aided determination of machining conditions. Science Report CEEPUS, Kielce 2010, pp.97-103. ISBN 978-83-88906-56-5

MÁDL, J., KVASNIČKA, J.: Optimalizace obráběcího procesu. Praha, ČVUT, 1998, 168

VASILKO, K.: Analysis of the Impact of Cutting on Machining Process, Manufacturing Engineering, issue 1, year IX, 2010, pp 5- 66

Yin, D.L. - Weng, L.K. – Liu, J.Q. – Wang, J.T.: Investigation of microstructure and strength of AZ80 magnesium alloy by ECAP and aging treatment. In: Metallic Materials. Vol. 49, No.1 (2011), p. 37-42, ISSN 0023-432X

MATISKOVÁ, D.: Automatic of component production and minimalization of production costs / Darina Matisková - 2012. In: Acta Technica Corviniensis. Vol. 5, no. 2 (2012), p. 103-106. - ISSN 2067-3809

MATISKOVÁ, D.: Economic Reasons for Automatic of Component Production / - 2011. In: Manufacturing Engineering. N. 3 (2011), s. 56-58. - ISSN 1335-7972

MURA, L., KRETTER, A.: Public relations az élemiszeripari gazdaságban. In XII. Nemzetközi tudományos napok. Gyöngyös: Karoly Róbert College, 2010, s. 696-700. ISBN: 978-963-9941-09- 0

JURKO, J., PANDA, A., VALÍČEK, J, at all: Study on cone roller bearing surface roughness improvement and the effect of surface roughness on tapered roller bearing service life: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Volume: 82 Issue: 5-8 Pages: 1099-1106 Published: FEB 2016 DOI: https://doi.org/10.1007/s00170-015-7449-8

FLIMEL, M., DUPLÁKOVÁ, D.: Layout effect of manufacturing workplace to illumination of working position / - 2017. In: International Journal of Engineering Technologies. Vol. 3, no. 1 (2017), p.11-13. ISSN 2149-0104

ANDREIOVÁ, M., GRINČOVÁ, A., MARASOVÁ, D. :Measurement and simulation of impact wear damage to industrial conveyor belts WEAR, Volume : 368, pages 400-407, published: dec. 2016 DOI: https://doi.org/10.1016/j.wear.2016.10.010

Published
2019-05-31
How to Cite
Matisková, D. (2019). MACHINABILITY OF MATERIALS AND THEIR MATHEMATICAL MODELS FROM AN ECONOMIC POINT OF VIEW . International Journal of Engineering Technologies and Management Research, 6(5), 154-161. https://doi.org/10.29121/ijetmr.v6.i5.2019.382