Name: Dr. Rajesh Kumar Porwal

Affiliation: Professor & Dean, Faculty of Mechanical Engineering, Shri Ramswaroop Memorial University, Barabanki, Uttar Pradesh, India

Email: rk_porwal@rediffmail.com / porwal.rajesh@gmail.com

Institutional Profile: Visit Profile Here

ORCID Profile: Visit Profile Here

Google Scholar Profile: Visit Profile Here

Scopus Id: Visit Profile Here

Dr. Rajesh Kumar Porwal is Professor & Dean, Faculty of Mechanical Engineering, Shri Ramswaroop Memorial University, Barabanki, Uttar Pradesh, India.

Educational Qualifications:

• Ph.D. Motilal Nehru National Institute of Technology Allahabad (MNNIT Allahabad) May 2014 (CPI 9.0) Mechanical Engineering
• Master of Engineering Birla Institute of Technology, Mesra, Ranchi, (BIT Mesra)2003 (2001-03) Ist Production Engineering (Automated Manufacturing System)
• Bachelor of Engineering Sardar Vallabhabhai National Institute of Technology Surat (SVNIT Surat) 1998 (94-98) Ist Production Engineering

Academic Experiences:

• Professor Mechanical Engineering, Faculty of Mechanical Engineering, Institute of Technology, Shri Ramwaroop Memorial University, Lucknow, Nov 2017 till Date
• Professor Mechanical Engineering, Department of Mechanical Engineering Faculty of Engineering, SGT University, Gurgaon, May 2016 to Nov 2017
• Professor Mechanical Engineering, Department of Mechanical Engineering KCC Institute of Technology & Management, Greater Noida, Aug 2013 to May 2016
• Associate Professor, Department of Mechanical Engineering Allenhouse Institute of Technology, Kanpur, Aug 2009 to July 2013
• Associate Professor, Department of Mechanical Engineering Krishna Institute of Technology, Kanpur, Mar 2008 to Aug. 2009
• Assistant Professor, Department of Mechanical Engineering Kanpur, Institute of Technology, Kanpur Jan 2007 to Feb 2008
• Lecturer, Department of Mechanical Engineering BBD National Institute of Technology and Management, Lucknow, Jul 2004 to Jan 2007
• Research Associate, Department of Industrial & Management Engineering, Feb 2003 to July 2004
• Indian Institute of Technology Kanpur
• Executive Quality/ Area Manager Service Hitachi Home and Life Solution (I) Ltd. 12, Mithakali Six Road Ahmedabad, Aug 1998 to July 2001

Academic Association History Publications:

a) Research Articles:

• A Sil, Y Tiwari, S Mandal, M Mukherjee, A Samanta, R Porwal, Influence of heat input on bead geometry, microstructure and hardness characteristics of dissimilar 410 martensitic stainless steel weld deposits on 304L substrate, Advances in Materials and Processing Technologies, 1-23, 2024.
• D Kumar, RK Porwal, Parametric optimization of thermoelectric machining of stir-cast hybrid magnesium metal matrix composite with alumina and silicon carbide as reinforcement, Journal of The Institution of Engineers (India): Series D, 1-17, 2024
• Rohit Singh, Rajesh Kumar Porwal, Vijay Verma, Effects of CNT Nanoparticles on the Performance and Emission Study of CI Engines Utilizing a Combination of Diesel and Waste Cooking Oil Biodiesel, Journal of Mines, Metals and Fuels, 72(4): 369-376; 2024
• D Kumar, RK Porwal, Recent Advances in Machining of Composite Materials by Electrical Discharge Machine, Key Engineering Materials 965, 3-20, 2023.
• DP Singh, S Mishra, RK Porwal, Parametric analysis through ANFIS modelling and optimization of micro-hole machining in super duplex stainless steel by die-sinking EDM, Advances in Materials and Processing Technologies 9 (4), 1885-1902, 2023.
• Rohit Singh, Rajesh Kumar Porwal, Vijay Verma, Effects of ZnO Nano-Particles’ on The Performance Study of CI Engines Utilizing a Combination of Diesel and Neem Biodiesel, Journal of Mines, Metals and Fuels, 71(12B): 06-11; 2023.
• Rohit Singh, Rajesh Kumar Porwal, Vijay Verma, Effects of ZnO Nano-Particles’ on The Performance Study of CI Engines Utilizing a Combination of Diesel and Neem Biodiesel, Journal of Mines, Metals and Fuels, 71(12B): 06-11; 2023.
• DP Singh, S Mishra, SKS Yadav, RK Porwal, V Singh, Comparative analysis and optimization of thermoelectric machining of alumina and silicon carbide reinforced aluminum metal matrix composites using different electrodes, Journal of Advanced Manufacturing Systems 22 (02), 373-401, 2023
• A Sharma, RK Porwal, Processing methods of metal matrix composites-a review, European Chemical Bulletin 12 (3), 2383-2389, 2023
• U Chandra, SP Chauhan, RK Porwal, KA Sharma, Microstructure and Structural Comparison between Additively Manufactured Metal and Ceramics, International Journal of Vehicle Structures & Systems 14 (5), 655-662, 2022
• RK Porwal, U Chandra, R Misra, Comprehending and optimising slurry behaviour characteristics of ceramics in additive manufacturing, Advances in Materials and Processing Technologies 8 (sup3), 1664-1698, 2022
• U Chandra, RK Porwal, S Mishra, BK Bhuyan, Theoretical Comparison of Properties and Their Characteristics Features for Additive Manufactured Metal and Ceramic Structures, Recent Advances in Materials Processing and Characterization, 107-126, 2022
• RK Misra, R Porwal, KK Saxena, SS Godara, Effect of post weld heat treatment on mechanical properties of MIG welded mild steel, Advances in Materials and Processing Technologies 8 (sup2), 489-503, 2022
• R K Porwal, K Vinod, PS Chauhan, RK Shukla, An overview to micro-wire electrical discharge machining, Materials Science and Engineering 1136 (1), 012021, 2021
• S Mishra, R Kumar, A Kumar, SKS Yadav, RK Porwal, Comparative analysis of ultrasonic drilling process using static and rotary tools, Journal of the Brazilian Society of Mechanical Sciences and Engineering 43, 1-20, 2021
• R K Porwal, V Kumar, an overview of CNT based electric discharge machining, Materials Today: Proceedings, 44, 1944-1948, 2021
• U Chandra, R K Porwal, A comprehensive study of the dynamics of density in 3d printed ceramic Structures, Materials Today: Proceedings, 44, 336-340, 2021
• RK Porwal, V Yadava, J Ramkumar, Micro Electrical Discharge Machining of Micro-Hole, Advanced Science, Engineering and Medicine 12 (11), 1335-1339, 2020
• R K Misra, R K Porwal, Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview E3S Web of Conferences, 184, 01028, 2020
• U Chandra, R K Porwal, A comprehensive study to select suitable method to enhance mechanical properties during 3D printing of metallic materials, E3S Web of Conferences,184, 01031, 2020
• RN Yadav, R K Porwal, J Ramkumar, Experimental Modeling of EDMed Aluminum Metal Metrix Composite: A Review, Lecture Notes in Mechanical Engineering, 511-518, 2020
• RN Yadav, R K Porwal, J Ramkumar, Optimization-Related Studies of EDMed Aluminum Metal Matrix Composites, Trends in Materials Engineering, 23-31, 2019
• R Porwal, R Maurya, A contribution concerning trends in modelling of Wire micro EDM of Titanium alloys- A review, IOP Conference Series: Materials Science and Engineering, 653, 2019
• M K Singh, R K Porwal, S Mishra, A State-of-the-Art Review on Modelling Work Carried Out during Friction Stir Welding, Materials Science and Engineering, 653, 2019
• R Maurya, R K Porwal, EDM of Hastelloy - An overview, Materials Today: Proceedings, 26, 311-315, 2019
• R Maurya, R K Porwal, V Kumar, Experimental investigation & modelling of wire EDM process during machining of Nicrofer 5716, Materials Today: Proceedings, 26,1184-1190, 2019
• R Maurya, R K Porwal, R Singh, concerning drifts to optimization techniques of wire-EDM process for titanium based super alloys: A review, Materials Today: Proceedings, 18, 4509-4514, 2019
• D P Singh, S Mishra, R K Porwal, Modal analysis of ultrasonic horn using finite element method, Materials Today: Proceedings,18, 3617-3623 2019
• V Kumar and R K Porwal, Effect of coating on erosion wear: An experimental investigation, Materials Science and Engineering,402, 2018
• Porwal, Rajesh Kumar; Yadava, Vinod, Experimentation and prediction of material removal rate of electrical discharge micromachining of nickel-based super alloy thin sheet, International Journal of Computer Aided Engineering and Technology,6, 62-73, 2014
• Porwal, Rajesh Kumar; Yadava, Vinod; Ramkumar, J, Modelling and Multi response optimization of hole sinking electrical discharge micromachining of titanium alloy thin sheet, Journal of Mechanical Science and Technology, 28, 653-661, 2014
• Porwal, Rajesh Kumar; Yadava, Vinod, Modelling of performance characteristics during sinking electrical discharge micromachining of Ti-6Al-4V thin sheet International Journal of Manufacturing Research, 9, 314-332, 2014
• Porwal, Rajesh Kumar; Yadava, Vinod; Ramkumar, J., Neural network-based modelling and GRA coupled PCA optimization of hole sinking electro discharge micromachining, International Journal of Manufacturing, Materials, and Mechanical Engineering, 4,1-21, 2014
• Porwal, R. K.;Yadava, V.;Ramkumar, J., Multi-Objective Optimization of Hole Drilling Electrical Discharge Micromachining Process Using Grey Relational Analysis Coupled with Principal Component Analysis, Journal of The Institution of Engineers (India): Series C, 94, 317-325, 2013
• Rajesh Kr. Porwal; Yadava, Vinod; Ramkumar, J., Artificial neural network modelling and multi objective optimisation of hole drilling electro discharge micro machining of invar, International Journal of Mechatronics and Manufacturing Systems, 5, 470-494, 2012
• Swami Sanjeev, and Rajesh Kr. Porwal, Entrepreneurship, innovation and marketing; conceptualization of critical linkages, Journal of Advances in Management Resarch, 2, 54-69, 2005.

b) Conference Publications:

• Rajesh Kr. Porwal, Arun Kumar and Vinod Yadava, An Overview of Modelling of Hole making Micro Electrical Discharge Machining, In: Proceedings of International conference Design, Materials & Manufacturing Concerns in Production of Quality Engineering Goods (DMMPQ-2017)
• Monika, Rajesh Kr. Porwal and Dinesh Deshwal, Analysis of Process Parameters in Wire EDM using Taguchi Method, In: Proceedings of International conference on Quality, Productivity, Reliability, Optimization and Modelling (QPROM-2017)
• Basant Kr. Bhuyan, Rajesh Kumar Porwal, Pravabati Bhuyan, Material Removal rate and kerf width og Kevlar-Epoxy composite machined with travelling wire ECSM, In: Proceedings of International conference on Quality, Productivity, Reliability, Optimization and Modelling (QPROM-2017)
• Rajesh Kr. Porwal, Sanjay Mishra, Modelling of Hole Sinking Electrical Discharge Micro machining of Ni based superalloy thin sheet, In: Proceedings of 2nd International conference on Advancements of Recent Innovation in Mechanical, Production and Industrial Engineering, (ARIMPIE-2016)
• Rajesh Kr. Porwal, and Vinod Yadava, Experimental Modelling of Electro Discharge Micro Machining Process, In: Proceedings of the 4th International Conference on Production and Industrial Engineering (CPIE-2016)
• Sanjay Mishra and Rajesh Kr. Porwal, Simulation of Laser Beam Drilling, In: Proceedings of the 4th International Conference on Production and Industrial Engineering (CPIE-2016)
• Sanjay Mishra and Rajesh Kumar Porwal, Comparatives study of Non-traditional Hole Machining Processes, In: Proceedings of 2nd International conference on Advancements of Recent Innovation in Mechanical, Production and Industrial Engineering, (ARIMPIE-2016)
• Rajesh Kumar Porwal and Vinod Yadava, Optimization of Process Parameters in the Hole Sinking Electrical Discharge Micromachining of Ti-6Al-4V Thin Sheet, In: Proceedings of the International conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering, (AFTMME-2013)
• Rajesh Kumar Porwal and Vinod Yadava, Artificial neural network modelling of hole drilling electro discharge micro machining, In: Proceedings of the 4th International and 25th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2012.
• Rajesh Kr. Porwal, Vinod Yadava and J Ramkumar Multi-Objective Optimization of Hole Drilling Electro Discharge Micromachining Process, In: Proceedings of the International conference on precision, Meso, Micro and Nano engineering (COPEN-2011)
• Rajesh Kr. Porwal and Vinod Yadava, Developments in Micro-Electro Discharge Machining Process, In: Proceedings of the International Conference on Production and Industrial Engineering (CPIE-2010)
• Rajesh Kr. Porwal, Singh BK, and Sharma Vinay, Knowledge base Computer Aided System for Mould Design in Automated Die Casting Process, In: Proceedings of the 20th All India Manufacturing Technology, Design and Research Conference, (AIMTDR-2002)

c) Book Published:

• A Sil, Y Tiwari, S Mandal, M Mukherjee, A Samanta, R Porwal, Influence of heat input on bead geometry, microstructure and hardness characteristics of dissimilar 410 martensitic stainless steel weld deposits on 304L substrate, Advances in Materials and Processing Technologies, 1-23, 2024.
• D Kumar, RK Porwal, Parametric optimization of thermoelectric machining of stir-cast hybrid magnesium metal matrix composite with alumina and silicon carbide as reinforcement, Journal of The Institution of Engineers (India): Series D, 1-17, 2024
• Rohit Singh, Rajesh Kumar Porwal, Vijay Verma, Effects of CNT Nanoparticles on the Performanceand Emission Study of CI Engines Utilizing a Combination of Diesel and Waste Cooking Oil Biodiesel, Journal of Mines, Metals and Fuels, 72(4): 369-376; 2024
• D Kumar, RK Porwal, Recent Advances in Machining of Composite Materials by Electrical Discharge Machine, Key Engineering Materials 965, 3-20, 2023.
• DP Singh, S Mishra, RK Porwal, Parametric analysis through ANFIS modelling and optimization of micro-hole machining in super duplex stainless steel by die-sinking EDM, Advances in Materials and Processing Technologies 9 (4), 1885-1902, 2023.
• Rohit Singh, Rajesh Kumar Porwal, Vijay Verma, Effects of ZnO Nano-Particles’ on The Performance Study of CI Engines Utilizing a Combination of Diesel and Neem Biodiesel, Journal of Mines, Metals and Fuels, 71(12B): 06-11; 2023.
• A Sharma, RK Porwal, Fabrication and Characterization of Copper Graphite Composite Material, Tuijin Jishu/Journal of Propulsion Technology 44 (2), 2023.