STEM ACTIVITIES WITH ROBOTIC CODING; THE EFFECT ON AWARENESS OF TEACHER CANDİDATES REGARDİNG ITS USE İN SCİENCE LESSONS
Keywords:STEM Activities, Robotics Coding, Science Subjects, Awareness
STEM education, which focuses on improving students' 21st century skills, aims to increase interest in engineering professions that have a very important place in the future of the world. Due to continuous innovation in technologies, it is critical to provide STEM and robotics coding training to students. Knowing the content of studies in our country related to STEM is of great importance for awareness of its use in science course. The aim of this study is to investigate the effect of robotics coding STEM activities on teacher candidates ' awareness of their use in science course. 37 science teacher candidates participated in the 12-week study. Qualitative research method was used in this study. Qualitative data was taken from the field notes and semi-structured interview. As part of STEM activities, it is aimed to teach teacher candidates Robotics Coding. In the activities, Arduino IDE, Fritzing programs were taught. Robotics coding STEM activities have had a positive impact on teacher candidates. Teacher candidates reported that activities increased their interest and attitude to science, and that they were instructive, fun, and useful. Teacher candidates expressed that robotics coding activities integrated into education system enabled making learning permanent.
Aydın, G., Saka, M. and Güzey, S. (2017). Examination of STEM (STEM) attitudes of 4th, 5th, 6th, 7th and 8th grade students in terms of some variables. Mersin University Journal of Education Faculty, 13 (2), 787-802. DOI: 10.17860 / mersinefd.290319 DOI: https://doi.org/10.17860/mersinefd.290319
Berlin, D. F., ve Lee, H. (2005). Integrating science ve mathematics education: Historica analysis. School Science ve Mathematics, 105(1), 15-24. DOI: https://doi.org/10.1111/j.1949-8594.2005.tb18032.x
Beane, J. (1995). Curriculum integration ve the disciplines of knowledge. Phi Delta Kappan, 76(8), 616-622.
Bahar, M., Yener, D., Yılmaz M., Emen, H., & Gürer, F. (2018). 2018 Science changes in curriculum outcomes and science, technology, mathematics engineering (STEM) integration. Abant İzzet Baysal University Faculty of Education Journal, 18 (2), 702-735. DOI: https://doi.org/10.17240/aibuefd.2018..-412111
Benitti, F. B. V. (2012). Exploring the educational potential of robotics in schools A systematic review. Computers & Education, 58(3), 978-988. DOI: https://doi.org/10.1016/j.compedu.2011.10.006
Beswick, K., & Fraser, S. (2019). Developing mathematics teachers’ 21st century competence for teaching in STEM contexts. ZDM, 51(6), 955–965. https://doi.org/10.1007/s11858-019-01084-2 DOI: https://doi.org/10.1007/s11858-019-01084-2
Burrows, S., Ginn, D. S., Love, N. ve Williams T. L. (1989). A strategy for curriculum integration of information skills instruction. Bulletin of the Medical Library Association, 77(3), 245-251.
Büyüköztürk, Ş., Kılıç Çakmak, E., Akgün, Ö. A., Karadeniz, Ş., & Demirel, F. (2013). Scientific research methods. Ankara: Pegem Academy Publishing.
Cameron, J. (2005). Focusing on the focus group. Qualitative Research Methods in Human Geography, 2(8), 116-132
Capraro, R. M. ve Slough, S. W. (2008). Project-based learning: an integrated science, technology, engineering, ve mathematics (STEM) approach. Rotterdam: The Netherlves: Sense Publishers.
Childress, V. W. (1996). Does integration technology, science, ve mathematics improve technological problem solving: A quasi‐experiment. Journal of Technology Education, 8(1), 16–26. DOI: https://doi.org/10.21061/jte.v8i1.a.2
Çepni, S. and Ormancı, Ü. (2017). The world of the future. Çepni, S. (Ed.), From Theory The application is in STEM + A + E Education (p.1-32). Ankara: Pegem Academy. DOI: https://doi.org/10.14527/9786052410561.01
Çepni, S. (2017). STEM + A + E education from theory to practice. Ankara: PegemAcademy.
Datteri, E. (2013). Predicting the long-term effects of human-robot interaction: A reflection on responsibility in medical robotics. Science and Engineering Ethics, 19(1), 139-160. DOI: https://doi.org/10.1007/s11948-011-9301-3
Daugherty, M. K. (2013). The Prospect of an" A" in STEM Education. Journal of STEM Education: Innovations and Research, 14(2). 220-240
Gazibeyoğlu, T. (2018). Stem applications of 7th grade students their achievements in the energy unit and their attitude towards science lesson examination of the effect (Unpublished Master's thesis). Kastamonu University, Institute of Science, Kastamonu.
Güleryüz, H., Dilber, R., Erdoğan, İ. (2019). Opinions of Preservice Teachers on Using 3D Printer in STEM Applications. Ağrı İbrahim Çeçen University. Journal of Social Sciences 5 (2) 1-8. DOI: https://doi.org/10.31463/aicusbed.592061
Güleryüz, H., Dilber, R., Erdoğan, İ. (2020). Opinions of Teacher Candidates on Coding Education in STEM Applications. Ağrı İbrahim Çeçen University. Journal of Social Sciences 6 (1). 71-83. DOI: https://doi.org/10.31463/aicusbed.610909
Güleryüz, (2020). The effect of 3D printer and robotic coding applications on 21st century learner skills of prospective teachers, STEM awareness and STEM teacher self-efficacy. Doctorate Thesis, Atatürk University, Institute of Educational Sciences. Erzurum.
Gültepe, A. A. (2018). Students are coding through the eyes of information technology teachers who teach coding. International Journal of Leadership Training, 2 (2), 50-60.
Jacobs, H. H. (1989). Interdisciplinary curriculum: Design ve implementation. Alexveria, VA: Association for Supervision ve Curriculum Development. Erişim adresi: goo.gl/z2kHBx
Khanlari, A. (2013). Effects of robotics on 21st century skills. European Scientific Journal, 9(27). 630-651.
Kuenzi, J.J. (2008). Science, Technology, Engineering, and Mathematics (STEM) Education: Background, Federal Policy, and Legislative Action. Education Policy and Domestic Social Policy Division. Retrieved June 8, 2018 from https://fas.org/sgp/crs/misc/RL33434.pdf
Ministry of Education. (2018b). Science Education Program. Access address: goo.gl/yeKhDc
Ríordáin, M. N., Johnston, J., & Walshe, G. (2016). Making mathematics and science integration happen: key aspects of practice. International Journal of Mathematical Education in Science and Technology, 47(2), 233-255 DOI: https://doi.org/10.1080/0020739X.2015.1078001
Sayın, Z., & Seferoğlu, S. S. (2016). Coding education as a new 21st century skill and its effect on education policies. Academic Informatics Conference, 2016, 3-5. DOI: https://doi.org/10.1002/he.20186
Smith, J. ve Karr-Kidwell, P. (2000). The interdisciplinary curriculum: a literary review ve a manual for administrators ve teachers. Erişim adresi: https://files.eric.ed.gov/fulltext/ED443172.pdf
Sullıvan, F. V. (2008). Robotics and science literacy: Thinking skills, science process skills and systems understanding. Journal of Research in Science Teaching, 45(3), 373-394. DOI: https://doi.org/10.1002/tea.20238
Stehle, S. M., & Peters-Burton, E. E. (2019). Developing student 21st Century skills in selected exemplary inclusive STEM high schools. International Journal of STEM Education, 6(1), 3–39. https://doi.org/10.1186/s40594-019-0192-1 DOI: https://doi.org/10.1186/s40594-019-0192-1
Sweller, J. (1989). Cognitive technology: Some procedures for facilitating learnin ve problem solving in mathematics ve science. Journal of Educatio Psychology, 81(4), 457-466. Erişim adresi: http://dx.doi.org/10.1037/0022- 06184.108.40.2067 DOI: https://doi.org/10.1037/0022-06220.127.116.117
Şenol, Ş., & Demirer V. (2017). Information Technologies and Software in Systematics from Coding Education to Robot Technology Course Teaching Program Example and Teachers' Views. 26th International Educational Sciences Congress, Analya.
Şenol, a. K., & Büyük, U. (2015). Robotik destekli fen ve teknoloji laboratuvar uygulamaları: Robolab. Electronic Turkish Studies, 10(3), 170-201. DOI: https://doi.org/10.7827/TurkishStudies.7953
Verma, A. (2015). Chına is teaching coding much, much earlier than USA ve India. Erişim adresi: goo.gl/uBRZo2
Verma, A. (2016). Japan Just Made Computer Programming A compulsory subject in its schools. Erişim adresi: goo.gl/8A6SYm.
Walan, S. (2019). The dream performance – a case study of young girls’ development of interest in STEM and 21st century skills, when activities in a makerspace were combined with drama. Research in Science & Technological Education, 1–21. https://doi.org/10.1080/02635143.2019.1647157 DOI: https://doi.org/10.1080/02635143.2019.1647157
Wang, H. (2012). A New era of science education: science teachers‘ perceptions ve classroom practices of science, technology, engineering, ve mathematics (STEM) ıntegration. (Unpublished Doctoral Thesis). University of Minnesota. Erişim adresi: goo.gl/6rVdZY
Welch, A., & Huffman, D. (2011). The effect of robotics competitions on high school students' attitudes toward science. School Science and Mathematics, 111(8), 416-424. DOI: https://doi.org/10.1111/j.1949-8594.2011.00107.x
YEĞİTEK. (2019). 2023 Education Vision. 17. Quality and Success Symposium. (13 April 2019). Bursa.
How to Cite
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section