INFLUENCE OF PHOSPHORUS IMPURITY ON THE STRUCTURE AND NATURE OF THE DESTRUCTION OF THE GENUINE DAMASCUS STEEL
DOI:
https://doi.org/10.29121/ijetmr.v5.i4.2018.205Keywords:
Damascus Steel, Wootz Steel, Indo-Persian Steel, BulatAbstract
It is established that the ancient knife blade belongs to the Eastern group of Indo-Persian steel type genuine Damascus steel with a pattern of "Kara-Taban", which literally means blackshiny. The methods of spectral, x-ray phase and optical analysis show that the genuine Damascus steel is a high-purity non-alloy high-carbon steel with a high content of phosphorus. It is revealed that phosphorus, having a high segregation coefficient of impurity contributes to the process of segregation of carbon in the process of crystallization of crucible ingots. The main physical and chemical factors influencing morphology of structure formation of genuine Damascus steel are revealed. It is established the relationship between the structure and the nature of the destruction of the genuine Damascus steel under impact load.
Downloads
References
ZschokkeВ. Du Damasse et des Lames de Damas // Rev.de Metallurgie, 1924. №21, 635 – 669.(In France) DOI: https://doi.org/10.1051/metal/192421110639
Gaev I.S. Bulat and modern iron-carbon alloys // Materials Science and Heat Treatment of Metals, 1965. №9, 17-24. (In Russia)
Verhoeven J.D., Jones L.L. Damascus steel, Part II: Origin of theDamask Pattern. // Metallographe,1987. №20, 153 – 180.(In USA) DOI: https://doi.org/10.1016/0026-0800(87)90027-9
Taganov I.N., Kalinin B.D. Influence of phosphorus impurity on the technology of Damascus steel. // Metalworking, 2009. №2 (50), 40 – 46. (In Russia)
Sherby, O. D., Wadsworth, J. Damascus steel // Scientific American, 1985, 252(2), 112-120. doi.org/10.1038/scientificamerican0285-112 DOI: https://doi.org/10.1038/scientificamerican0285-112
Verhoeven, J. D., Pendray, A. H., Gibson, E. D. Wootz - Damascus steel Blades // Materials Characterization, 1996, 37, 9-22. doi.org/10.1016/s1044-5803(96)00019-8 DOI: https://doi.org/10.1016/S1044-5803(96)00019-8
Barnett M. R., Sullivan A., Balasubramaniam R. Electron Backscattering Diffraction Analysis of an Ancient Wootz steel Blade from Central India // Materials Characterization, 2009, №60, 252- 260. doi.org/10.1016/j.matchar.2008.10.004 DOI: https://doi.org/10.1016/j.matchar.2008.10.004
Levin A.A., Meyer D.C., Reibold M., Kochman W., Patrke N., Paufler P. Microstructure of a genuine Damascus sabre // Crystal Research Technology, 2005, №9 (40), 905- 916.doi.org/10.1002/crat.200410456 DOI: https://doi.org/10.1002/crat.200410456
Al-Biruni. Collection of information for knowledge of jewelry (Mineralogy). // Ed. Academy of Sciences of the USSR under the editorship Prof. G.G. Lemmlein, 1963. – 518. (In Russia)
Sukhanov D.A., Arkhangelskiy L.B. Damascus steel microstructure // Metallurgist, 2016, vol. 59, №9, 818–822.doi.org/10.1007/s11015-016-0178-x DOI: https://doi.org/10.1007/s11015-016-0178-x
Sukhanov D.A., Plotnikova N.V. Wootz: Cast Iron or Steel? // Materials Sciences and Applications, 2016, №7, 792-802. doi.org/10.4236/msa.2016.711061 DOI: https://doi.org/10.4236/msa.2016.711061
Sukhanov D.A., Arkhangelskiy L.B., Plotnikova N.V. Nature of Angular Carbides in Damascus steel. // Metallurgist, 2017,Vol. 61, №1-2, 40–46. doi.org/10.1007/s11015-017-0451-7 DOI: https://doi.org/10.1007/s11015-017-0451-7
Sukhanov D., Arkhangelsky L. Formation of Excess Carbide Phase in Damascus steel // International Journal of Modern Research in Engineering and Technology (IJMRET), 2017, Vol.2, Issue6, 9-18. ISSN: 2456-5628
Sukhanov D.A., Arkhangelskiy L.B., Plotnikova N.V. Damascus steel ledeburite class // Materials Science and Engineering, 2017. №1 (175), 1-7.doi.org/10.1088/1757- 899X/175/1/012017 DOI: https://doi.org/10.1088/1757-899X/175/1/012017
Sukhanov D.A., Arkhangelsky L.B. Formation of Eutectic Carbides in the Structure of High-Purity White Cast Iron in the Forging Process.// Materials Sciences and Applications, 2017, No. 8, 351- 360. doi.org/10.4236/msa.2017.85024 DOI: https://doi.org/10.4236/msa.2017.85024
Sukhanov D.A., Arhangelskiy L.B., Plotnikova N.V., Sukhanova L.N., GolikovA.Yu. White Cast Iron Plastic Deformation. // Metal Working and Material Science, 2017, №4 (77), 43–54. doi.org/10.17212/1994- 6309-2017-3-43-54. DOI: https://doi.org/10.17212/1994-6309-2017-4-43-54
Downloads
Published
How to Cite
Issue
Section
License
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section
