STUDY AND PERFORMANCE OF PARTIAL DISCHARGE OF MODEL FOR DIFFERENT TYPE INSULATION MATERIALS WITH CAPACITANCE VALUE
Keywords:Partial Discharge, Insulation Materials, Capacitance Value, Simulation
The properties of the insulating material must be the best to avoid failure of electrical equipment. Partial discharges act as electrical sparks that occur within insulation and the high-voltage electrical system. The different types of voltage and current pulses are produced, which last for a very short time. Partial discharge is taking place in high voltage power equipment such as cables, transmission lines and transformers, etc.
K. S., Srinivasa, D. M.: 'Analysis study on partial discharge magnitudes to the parallel and perpendicular axis of a cylindrical cavity', International Journal of Engineering Trends and Technology, 2017, 45, (7), pp. 334-337. DOI: https://doi.org/10.14445/22315381/IJETT-V45P270
W. S., Kuffel, J.: 'High voltage engineering: fundamentals' (Eleslever, 2005).
Boggs, S. A.: 'Partial discharge. iii. cavity-induced PD in solid dielectrics', IEEE Electrical Insulation Magazine, 1990, 6, (6), pp. 11-16. DOI: https://doi.org/10.1109/57.63094
Ab Halim Abu Bakar, “Partial Discharge Patterns in High Voltage Insulation” IEEE International Conference on Power and Energy (PECon), Kota Kinabalu Sabah, Malaysi, 2-5 December 2012.
I.W. McAllister,” Partial Discharges in Spheroidal Voids Void Orientation”, IEEE Transactions on Dielectrics and Electrical Insulation bl. 4 No. 4, August 1997. DOI: https://doi.org/10.1109/94.625363
How to Cite
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.