ANALYSIS OF PID CONTROLLER USE ON AUXILIARY WINDING INDUCTION MOTOR WITH FUZZY LOGIC METHOD
Keywords:Induction Motor, PID, Fuzzy Logic
Controlling the control of an induction motor with a stable and fast speed is very much needed in the industrial. To get a constant speed and be able to improve the performance of the induction motor, a PID controller circuit is needed. Fuzzy logic method is known to work with a fast response and enough good performance. The value of the motor speed formed with PID control and fuzzy logic, the rotor speed with fuzzy is the same as that without using fuzzy of 1785 rpm with the same overshoot and fuzzy rise time value of 346,605 ms and the value of rise time without fuzzy of 346,111 ms. The results obtained in the Main current without fuzzy of 2.2 A, main current with fuzzy of 2.2 A, aux. Current without fuzzy is 1.6 A, aux. Current with fuzzy 1.9 A, load and elctromag torque without fuzzy no value, load and elctromag torque with fuzzy no value, main voltage without fuzzy 154 V, main voltage with fuzzy 154 V, aux. Voltage without fuzzy 180 V, aux. Voltage with fuzzy is 184 V, rotor speed without fuzzy is 1785 rpm, rotor speed with fuzzy is 1785 rpm.
A. Faizal and V. D. Sinta, (2018) "Design of Single Phase Main and Auxiliary Winding Motor Speed Control in Centrifugal Machines With Second Order Viteckova Model Approach Using Hybrid Fuzzy-Smc Method," J. Sains, Teknol. and Ind., vol. 15, no. 2, pp. 138-143. Retrieved from https://doi.org/10.24014/sitekin.v15i2.5116 DOI: https://doi.org/10.24014/sitekin.v15i2.5116
C. Ning, (2016)"Kalman filtering speed estimation of vector control for induction motor drives," IEEE Int. conf. Power System. Technol. POWERCON 2016. Retrieved from https://doi.org/10.1109/POWERCON.2016.7753864 DOI: https://doi.org/10.1109/POWERCON.2016.7753864
D. R. Irawan, G. M. C. Mangindaan, D. Ph, and L. S. Patras, (2016) "Stability Analysis Motor Speed Main and auxiliary winding 3 Phase Based 80-86,
D. Sasmita, A. Pambudi, M. Sarwoko, E. Kurniawan, F. T. Elektro, and U. Telkom, (2016) "Control of Single Phase Main and auxiliary winding motors," J. Investigator. and Pemb. Telecom. Control, Computer, Electrical. and Electron., vol. 1, pp.76-84.
E. Wahjono, (2015) "Main and auxiliary winding motor speed regulation as" Electric Car Drive With Direct Torque Based Fuzzy Logic Controller Control," J. Ilm. Mikrotek, vol. 1, no. 3, pp. 136-144.
F. Arvianto and M. Rameli, (2017) "Single Phase Main and Auxiliary Winding Motor Speed Control Using PID Self-Tuning-Based Flux Vector Control Method," J. Tech. ITS, vol. 6, no. 2. Retrieved from https://doi.org/10.12962/j23373539.v6i2.25079 DOI: https://doi.org/10.12962/j23373539.v6i2.25079
F. M. W. Fatih Mutamimul Wildan, (2016) "Main Motor Speed Regulation System and auxiliary winding Single Phase Using PIDD Based Controller Genetic Algorithm," Kinetics, vol. 1, no. 1, pp. 23-32. Retrieved from https://doi.org/10.22219/kinetik.v1i1.14 DOI: https://doi.org/10.22219/kinetik.v1i1.14
F. Yusivar and N. Avianto Wicaksono, (2016) "Main and auxiliary machine simulation winding Without Speed Sensor Using Vector Orientation Controller," J. Nas. Tek. Electrical and Technol. Inf., vol. 4, no. 4. Retrieved from https://doi.org/10.22146/jnteti.v4i4.171 DOI: https://doi.org/10.22146/jnteti.v4i4.171
L. Wang, S. Chai, D. Yoo, L. Gan, and K. Ng, (2015) PIDD and Predictive Control of Electrical Drives and Power Converters using MATLAB/Simulink. Singapore: John Wiley & Sons Singapore Pte. Ltd. Retrieved from https://doi.org/10.1002/9781118339459 DOI: https://doi.org/10.1002/9781118339459
M. S. A. Sari, H. Suyono, and A. Lomi, (2021) "Analysis of Motor Speed Control Main and auxiliary winding 3 Phase with Direct Torque Control Method (DTC) PIDD Based Control," vol. 8, no. 2, pp. 70-77.
N. Evalina and A. A. Zulfikar, (2018) "Adjusting the Rotation Speed of 3 Phase Main and auxiliary winding Motors Using a Programmable Logic Controller," J. Electr. Technol., vol. 3, no. 2, pp. 73-80.
R. Gunawan, F. Yusivar, W. Wahab, and Z. A. Kadir, (2010) "Design of Single Phase Main and Auxiliary Winding Motor Without Speed Sensor With Current Vector Controller And Full And Reduced Observer On The Dq Axis," MAKARA Technol. Ser., vol. 10, no. 1, pp. 34-39. Retrieved from https://doi.org/10.7454/mst.v10i1.408 DOI: https://doi.org/10.7454/mst.v10i1.408
How to Cite
Copyright (c) 2021 Hartono, Karim Amarullah, Alief Maulana
This work is licensed under a Creative Commons Attribution 4.0 International License.