RESEARCH AND DEVELOPMENT OF ADDITIVE TECHNOLOGY IN INDUSTRIAL MANUFACTURING OF NEW PRODUCTS IN KAZAKHSTAN
DOI:
https://doi.org/10.29121/granthaalayah.v7.i2.2019.1014Keywords:
Additive Technology, Three-Dimensional Printing, Innovation in Technical EducationAbstract [English]
The main goal of the project is to investigate the possible ways of introducing the additive technologies, to study the peculiarities of the layer wise synthesis process when producing foundry patterns and defining basic parameters which influence the quality of the produced parts. Based on the analysis of the results of activities aimed at the development of three-dimensional printing in Kazakhstan, highlighted the alleged problems of the successful implementation of additive technologies in the economy and in education particularly. In article the scheme of the existence and development of new technologies and the role of government’s support in the process is given. The results of data analysis from the Internet shows that there is a sufficient number of three-dimensional modeling laboratories, but it is mostly commercial service companies in the field of three-dimensional printing. The key factor in the growth of any economy is to organize an effective system of technology transfer and its further improvement.
Downloads
References
Muhamadeyeva R. M. "Technology transfer is prototyping in Kazakhstan", Germany, European Applied Sciences, №5, 2013 pp.15-17
Muhamadeyeva R.M. The parameters of additive technology in 3D printing, the Eurasian Union of Scientists (EUS). 2014, IV:118-119
Zlenko M. A. "Additive technologies in mechanical engineering" /MV Nagaitsev, VM Dovbish // manual for engineers. - M. GNC RF FGUP "NAMI" 2015. 220 p.
Kozemchuk K. Dovbish B. Additive technologies in Russian industry. Scientific and technical statements of St. Petersburg State Polytechnic University. 2013, 4, S. 183
Muhamadeeva R. M., Nazarenko M., Okselenko O., Abayeva N. F., Golovachyova V. N., Baidak Y. "Innovations in technical and natural science". Monograph, Volume 2/ ed. by P. Busch. – Vienna: “East West” Association for Advanced Studies and Higher Education GmbH, 2016. – 56 p.
Grigoryants A. G., Novichenko D. Y., Smurov I.Y. "Laser additive manufacturing techniques and coatings of parts made of composite material" Proceedings of the universities ,2011, №7, pp.38-46
http://3dtoday.ru/wiki/3D_print_technology/ (date accessed: 07/22/2014)
Muhamadeуeva R. M. "Parameters of additive technology at the 3D printing”, The International scientific and practical “Europe-Asia” conference, 4, 2014, p.118
V.S. Doroshenko "3D-technology in metal casting ITB" Casting of Ukraine, №03 (151) 2013 pp. 16-18
Muhamadeyeva R. M. "Methodological Guide Drawing". Textbook for Grade 9. Kokshetau, Publisher "Keleshek". 2013
Muhamadeyeva R. M. "Сomputer aided design system in the education procces of competitive professionals" "Global Science and Innovation” Materials of the V international scientific conference, s. 353-355. Chicago, USA 2015
Muhamadeyeva R. M., Muhamadeyeva. A., Akoxova N. V. "Problems of technical and vocational education in Kazakhstan". Scientific publications Journal "Actual problems of the humanities and natural sciences» №11, part VI of, Moscow, 2015. pp 108-112
Techel A. et al., "Laser Additive Manufacturing of Turbine Components", Precisely and Repeatable. Fraunhofer Institute for Material and Beam Technology (IWS), [Electronic resource is] the regime of the access.: http://www.lia.org/blog/category/laser-insights-2/laser-additive-manufacturing/
Muhamadeeva R. M. "Implementation issues of additive technologies" International journal of engineering sciences & research technology № 5(2): February, 2016
Materials 3D Print Conference, news@3dprintconf.com.ua
3-D Printing Manufacturing Process is Here.; Independent global forum for the Unmanned Aircraft Systems community, UAS Vision. [Electronic resource is] the regime of the access: http://www.uasvision.com/12/07/16/3-d-printing-manufacturing-process-is-here/
Muhamadeyeva R. M., Muhamadeyeva T. M., Muhamadeyeva I. A. "Structural and Logical Approach to the Introduction of Dual Training in Vocational and Technical Education System of the Republic of Kazakhstan" Indian Journal of Science and Technology, Vol 8(S10), December 2015 DOI: https://doi.org/10.17485/ijst/2015/v8is(10)/84854
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
