RESEARCH OF PHYSICAL AND MECHANICAL PROPERTIES OF BLENDED BRICKS WİTH FLY ASH BASED, BLAST FURNACE SLAG ADDITION
DOI:
https://doi.org/10.29121/granthaalayah.v7.i1.2019.1041Keywords:
Flay Ash, Blast Furnace Slag, Brick, Physical Property, Mechanical PropertyAbstract [English]
In this study, it is aimed to make improvements on blended brick (1) which is the first building material has a history of at least 10,000 years. To the blended brick which is a traditional material was kept constant at 5% the addition of fly ash which is industrial waste. It was aim of determine of the effect on the physical and mechanical properties of the blended brick using different ratios (5%, 10%, 15% and 20%) blast furnace slag. In the first stage, the production of fly ash-based blast furnace slag doped sample of blended brick was performed. In the second stage, a variety of experiments were applied to determine the physical and mechanical properties of the blended brick sample. As a result; It has been determined that unit volume weight and compressive strength decreases with the use of industrial wastes in blended brick production. They have occured an increase in porosity and capillary water absorption values. The use of industrial wastes in the production of blended bricks will contribute both improve the properties of the bricks and the reduction of wastes left to the environment.
Downloads
References
İspir, M. A Comprehensive Experimental Research On The Behavior Of Historical Brick Masonry Walls Of 19th Century Buildings, Doktora Tezi, Istanbul Technical University, Institute of Science and Technology İstanbul, 2010, 47-48.
Rahman, ME., Ong, PJ., Nabinejad, O., Islam, S., Khandoker NAN., Pakrashi, V. and Shorowordi, KM. Utilization of Blended Waste Materials in Bricks, Technologies, 6 (20),2018, 1-12. DOI: https://doi.org/10.3390/technologies6010020
Houben, H., Guillaud, H. Earth construction: A Comprehensive Guide, London, 1994.
Niroumand, H., Zain, MFM., Alhosseini, SN. The influence of nano-clays on compressive strength of earth bricks as sustainable materials, Procedia – Social and Behavioral Sciences (89), 2013, 862–865. DOI: https://doi.org/10.1016/j.sbspro.2013.08.945
Shakir, AA., Naganathan, SK., Mustapha, KNB. Development Of Bricks From Waste Material: A Review Paper. Australian Journal of Basic and Applied Sciences, 7(8), 2013, 812-818.
Çelebi, GÜ. Usage Properties for Building Materials and Construction, Gazi University, Faculty of Engineering and Architecture, Department of Architecture, Lecture Notes, Ankara, 2007.
More, A., Tarade, A., Anant, A. Assessment Of Suitability Of Fly Ash And Rice Husk Ash Burnt Clay Bricks, International Journal of Sciences. Research Publishing, 4 (7), 2014, 1–6.
Pawar, A., Garud, D. Engineering properties of clay bricks with use of fly ash, International Journal of Research in Engineering and Technology, 3 (9), 2014, 75–80. DOI: https://doi.org/10.15623/ijret.2014.0321016
Kumar, R., Hooda, N. An experimental study on properties of fly ash bricks, International Journal of Mechanical Engineering and Robotics Research, 2 (9), 2014, 56–67.
Chidiac, SE., Federico, LM. Effects of waste glass additions on the properties and durability of fired clay brick, Canadian Journal of Civil Engineering, 34 (11), 2007, 1458–1466. DOI: https://doi.org/10.1139/L07-120
Chen, Y., Zhan,g Y., Chen, T., Zhao, Y., Bao, S. Preparation of eco-friendly construction bricks from hematite tailings, Construction and Building Material, 25 (4), 2011, 2107–2111. DOI: https://doi.org/10.1016/j.conbuildmat.2010.11.025
Munoz, VP., Morales, OMP., Mendívil, GMA., Munoz, VL. Fired clay bricks manufactured by adding wastes as sustainable construction material – a review, Construction and Building Material 63, 2014, 97–107. DOI: https://doi.org/10.1016/j.conbuildmat.2014.03.045
Djangang, C., Kamseu, E., Elimbi, A., Lecomte, G., Blanchart, P., Net-shape clay ceramics with glass waste additive, Materials Sciences and Applications 5, 2014, 592–602. DOI: https://doi.org/10.4236/msa.2014.58061
Kazmi, SMS., Abbas, S., Saleem MA., Munir, MJ., Khitab, A. Manufacturing of sustainable clay bricks: utilization of waste sugarcane bagasse and rice husk ashes, Construction and Building Material 120, 2016, 29–41, DOI: https://doi.org/10.1016/j.conbuildmat.2016.05.084
Kazmi, SMS., Abbas, S., Munir, MJ., Khitab, A. Exploratory study on the effect of waste rice husk and sugarcane bagasse ashes in burnt clay bricks, Journal of Building Engineering 7, 2016, 372–378. DOI: https://doi.org/10.1016/j.jobe.2016.08.001
Çağlar, H., Çağlar, A., Korkmaz, SZ., Demirel, B., Bayraktar, OY. Comparison Of The Physical And Mechanical Properties Of Manually Manufactured And Factory Production Blended Bricks Used In Build Of Traditional Kastamonu Houses, Fırat University Journal of Engineering Sciences, 30 (2), 2018, 39-48.
Tokyay, M., Çetin, B. Strength and water absorption properties of volatile culvert bricks applied with pressed steam cure, Technical Journal, TMMOB Construction Engineering, Chamber Publishing, Skin 2, Istanbul, Turkey, 1991, 385–394.
Tütünlü, F., Atalay, Ü. Utilization of fly ash in manufacturing of building bricks, International Ash Utilization Symposium, Center for Applied Energy Research, University of Kentucky, Lexington, Kentucky, USA, 2011.
Özdemir, M., Öztürk, NU. Utilization of Clay Wastes Containing Boron as Cement Additives, Cement and Concrete Research, 33(10), 2003, 1659-1661. DOI: https://doi.org/10.1016/S0008-8846(03)00138-8
Güler, G, İpekoğlu, Ü., Mordoğan, H. Using Areas and Properties of Fly Ashes, Turkey 19th International Mining Congress and Exhibition, İzmir, Turkey, 2007, 419-420.
Murathan, A., Asan, A., Abdulkerem, TA. Evaluation of environmental wastes on building materials, Gazi University. Journal of Engineering Architecture, 28 (2), 2013, 409–416.
Xu, L., Gou, W., Wang, T., Yang, N. Study on fired bricks with replacing clay by fly ash in high volume ratio, Construction Building Material 19, 2005, 243–247. DOI: https://doi.org/10.1016/j.conbuildmat.2004.05.017
Aydın, O. Investigation of the Use of Thermal Power Plant Ashes in Building Brick Production, Master Thesis, Afyon Kocatepe University, Afyonkarahisar, 2007.
Abbas, S., Saleem, MA., Kazmi, SMS. ve Munir, MJ. Production of Sustainable Clay Bricks Using Waste Fly Ash: Mechanical and Durability Properties, Journal of Building Engineering, 14, 2017, 7-14. DOI: https://doi.org/10.1016/j.jobe.2017.09.008
Leiva, C., Arenas, C., Alonso-Farinas B., Vilches, L.F., Peceno, B., Rodriguez-galan M. Characteristics of fired bricks with co-combustion fly ashes, Journal of Building Engineerig 5, 2006, 114–118. DOI: https://doi.org/10.1016/j.jobe.2015.12.001
Çiçek, T., Çinçin, Y. Use of fly ash in production of light-weight building bricks, Construction Building Material 94, 2015, 521–527. DOI: https://doi.org/10.1016/j.conbuildmat.2015.07.029
Bouzoubaa, N., Lachemi, M. Self-compacting concrete incorporating high volumes of class fly ash: preliminary results, Cement and Concrete Research 31 (3), 2001, 413–420. DOI: https://doi.org/10.1016/S0008-8846(00)00504-4
Li, Y., Lin, Y. Compacting Solid Waste Materials Generated in Missouri to Form New Products. Final Technical Report to the Solid Waste Management Program. Missouri Department of Natural Resources (MDNR) (Contact no. MDNR 00038-1), Capsule Pipeline Research Center, University of Missouri-Columbia, USA, 2002.
Öner, M. Determination of the Effects of Grinding Parameters on the Use of Blast Furnace Slag in Cement Production. Hacettepe University Earth Sciences Application and Research Center Bulletin, Ankara, (23), 2001, 61–69.
Binici, H., Sevinç, AH., Durgun, MY. Resistance of pumice, barite, colemanite and blast furnace slag additive mortars and sulphate resistance, Electrical Journal of Construction Technology, 7 (1), 2011, 39-51
Erdoğan, TY. Concrete, METU Development Foundation and Publishing, Ankara, 2003.
Böke, H., Akkurt, S., Ipekoğlu, B., Uğurlu, E. Characteristics of brick used as aggregate in historic brick-lime mortars and plasters, Cement Concrete Research, 36(6), 2006, 1115-1122. DOI: https://doi.org/10.1016/j.cemconres.2006.03.011
Bayat, O. Characterisation of Turkish fly ashes, Fuel, 77(9/10), 1998, 1059-1066. DOI: https://doi.org/10.1016/S0016-2361(97)00274-3
Güvercin, T. The Investigation of the effect of the silica fume, fly ash and blast furnace slag on the cement properties, Master Thesis, Atatürk University, Erzurum, 2002.
TS EN 772-1, Methods of test for masonry units- Part 1: Determination of compressive strength, Turkish Standards Institute, Ankara, 2012.
TS EN 772-4, Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units, Ankara, Turkish Standards Institute, 2000.
TS EN 772-11, Methods of test for masonry units Part 11: Determination of water absorption of aggregate concrete manufactured stone and natural stone masonry units due to capillary action on the initial rate of water absorption of clay masonry units, Turkish Standards Institute, Ankara, 2012.
TS 705, Solid Bricks and Vertically Perforated Bricks, Turkish Standards Institute, Ankara, 1985.
Çağlar, A. Experimental research on improvement with boron waste additive of properties of blend brick used in traditional Kastamonu houses, PhD Thesis, Selçuk University, Konya, 2018.
Fetra, VR., Ismail, A.R., Ahmad, MAZ. Preliminary study of compressed stabilized earth brick, Australian Journal of Basic and Applied Sciences, 5 (9), 2011, 6–12.
Freidin, K., Erell, E. Bricks made of coal fly-ash and slag, cured in the open air, Cement and Concrete Composites, 17 (4), 1995, 289–300. DOI: https://doi.org/10.1016/0958-9465(95)00017-7
Sürül, O. Investigation of the use of blast furnace slag and fly ash as additives in brick production, Master Thesis, Bülent Ecevit University, Zonguldak, Turkey, 2015, 6-8.
Fernando, PT., Said, J. Eco-efficient, Construction Building Materials, Springer, Verlag London, 2011.
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
