AN EXPERIMENTAL STUDY ON EFFECTIVE UTILIZATION OF BOTTOM ASH (ENNORE) AS FINE AGGREGATE IN CONCRETE UNDER FLEXURE
DOI:
https://doi.org/10.29121/granthaalayah.v5.i6.2017.2008Keywords:
Bottom Ash, Compressive, Split Tensile, Flexural Strength of ConcreteAbstract [English]
Since the construction industry is developing very fast the requirement of concrete and their constituent materials are also increasing day by day. Hence the need becomes in evitable to find various alternate means for the aggregate and accordingly the researchers are going on in this way. But the availability of fine aggregate becomes difficult day by day. Hence the need arises to find alternative for the fine aggregate. The material which is known as bottom ash is available ash waste by-product material from the thermal power plants. In India most of the thermal power plants use wet system for disposal of ash. Bottom ash will be generated as a residue after burning pulverised coal at boiler cyclone and collected from bottom ash hopper located under boiler structure.
In this project work the material bottom ash is experimentally analysed and studied for its suitability as replacement as fine aggregate up to (0% to 50%). So far few researchers analysed its suitability as FA by finding the compressive strength of concrete. But in this project work the split tensile strength of concrete and flexural strength of concrete were analysed by replacing bottom ash as fine aggregate.
Downloads
References
Jaturapitakkul, C.and Cheerarot, R., (2003) “Development of bottom ash as pozzolanic Material”. JMater Civil Engg, Vol.15 (1), pp.48-53. DOI: https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(48)
Manz,O.E.,(1997) “World wide production of coal ash and utilization in concrete and others Products” Fuel,Vol.76 (8), pp.691–696. DOI: https://doi.org/10.1016/S0016-2361(96)00215-3
Muhammad, M.S., (2010) “Strength characteristics of Compacted Residual Soil-Bottom Ash mixture” Unpublished B.Eng. University Technology Malaysia.
Muhardi, Marto, A., Kassim, K.A., Maktar, A.M., Lee, F.W. and Yap, S.L., (2010) “Engineering Characteristics of Tanjung Bin Coal Ash” Electronic Journal of Geotechnical Engineering. Vol.15, pp.1117-1129.
Ashis Kumar Beraetal., (April, 2007), “Compaction characteristics of pond ash”, Journal of materials in Civil Engg, 19(4), pp 349357. DOI: https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(349)
Bruce A. Dockteretal., (1999), International ash utilization symposium, 1999 centre for use of bottom ash and fly ash in rammed earth construction applied energy research, university of Kentucky.
Gokhale (2002), 'Flyash Lime Technology in the construction Sector' National conference on 'Advances in construction materials', (ed) Virendra Kumar, et.al. pp l8.
IS 456 (2000), 'Plain and Rein forced concrete code for practice’
K.aniraj S.R. and Havangi V.J (Aug, 1999), 'Geotechnical characteristics of Fly ash soil mixture'' Geotechnical Engineering journal, 30 pp 129147.
Masashi Kamon, Kohesisawa, Seishi Tomokisa and NagahideNaiio, (Jan, 1998), 'Industrial waste material', 'International conference on Fly ash disposal and utilization CBIP', New Delhi, pp 361367.
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
