EXPERIMENTAL STUDY OF WEAR IN SHEET METAL DURING VARIOUS FORCES
DOI:
https://doi.org/10.29121/granthaalayah.v5.i2.2017.1718Keywords:
Wear, Sheet Metal Forming, Lever, Guide WayAbstract [English]
The experiments are conducted for different clearances between punch and die. It is observed that, beyond a clearance for each thickness of the steel sheet metal, however, below the critical clearance, scratches on the surface of the sheet metal were seen due to wear. Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes.
Downloads
References
Ramalho, Study of the relationships friction – contact stresses using load scanner tests, in: Proceedings 11th Nordic Symposium on Tribology – NORDTRIB2004, 2004, pp. 699–707.
Andrey V. Gnatov,, Pulsed electromagnetic attraction of nonmagnetic sheet metals , Journal of Materials Processing Technology 214 (2014) pp390– 401 DOI: https://doi.org/10.1016/j.jmatprotec.2013.09.018
Ibrahim Demirci H, Yas_ar M, Demiray K. The theoretical and experimental investigation of blank holder forces plate effect in deep drawing process of Al 1050 material. Mater Des 2008;29(2):526–32. DOI: https://doi.org/10.1016/j.matdes.2007.01.008
Jawad Waleed Khalid. Investigation of contact interface between the punch and blank in deep drawing process. J Eng Technol 2007;25(3):370–82.
Vladimirov IvayloN, Pietryga MichaelP, Reese Stefanie. Anisotropic finiteelastoplasticitywith nonlinear kinematic and isotropic hardening and application to sheet metal forming. Int J Plasticity 2010; 26:659–87. DOI: https://doi.org/10.1016/j.ijplas.2009.09.008
Fereshteh-Saniee F, Montazeran MH. A comparative estimation of the forming load in the deep drawing process. J Mater Process Technol 2003; 140:555–61. DOI: https://doi.org/10.1016/S0924-0136(03)00793-3
Lange Kurt. Handbook of metal forming. Society of Manufacturing Engineers; 1985.
Meguid SA, Refaat MH. Finite element analysis of the deep drawing process using variational inequalities. Finite Elements Anal Des 1997; 28:51–67. DOI: https://doi.org/10.1016/S0168-874X(97)81962-2
Suchy I. Handbook of die design. 2nd ed. McGraw-Hill Publishing; 2006. p. 353–400.
Garcia-Romeu ML, Ciurana J, Ferrer I. J Mater Process Technol 2007;191(1– 3):174–7. DOI: https://doi.org/10.1016/j.jmatprotec.2007.03.019
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
