DEVELOPMENT OF HEATING AND COOLING THEMAL MODEL FOR AN AUTOMOTIVE AIR COMPRESSOR BASED ON EXPERIMENTAL DATA

Hao Liu; Jae-Cheon Lee

doi:10.29121/ijoest.v7.i3.2023.497

Authors

Hao Liu Assistant Professor, Department of Mechanical engineering, Keimyung University, Daegu (42601), South Korea
Jae-Cheon Lee Professor, Department of Mechanical engineering, Keimyung University, Daegu (42601), South Korea

DOI:

https://doi.org/10.29121/ijoest.v7.i3.2023.497

Keywords:

Air Compressor, Air Suspension System, Thermal Model

Abstract

The paper presents how to determine the heating and cooling thermal model for an air compressor of automotive air suspension system by using experimental data. A set of test bench for the air compressor was firstly established. Based on experiment, temperature of the heat sink of the air compressor and air temperature and pressure inside two tanks were obtained. By analyzing heat exchange process of air compressor, the thermal model of air compressor is constructed, including temperature increasing and decreasing process. The calculated results by means of the presented model show that the thermal model can correctly descript the process of temperature variation of the air compressor.

Downloads

Download data is not yet available.

References

Cengel, Y., Boles, M. (2006). Thermodynamics: an Engineering Approach (Fifth Edition), McGraw-Hill. https://netedu.xauat.edu.cn/sykc/gcrlx/content/jcjs/Engineering%20Thermodynamics.pdf

Faisa, B. (2005). Investigation of Switching Valve for Air-Spring Auxiliary Volumes by Means of Simulation With A Full Vehicle Model, Diplomarbeit, Institut fuer kraftfahrwesen Aachen.

Giuseppe, Q., & Massimo, S. (2001) Air Suspension Dimensionless Analysis and Design Procedure. Vehicle System Dynamics, 35(6), 443-475, https://doi.org/10.1076/vesd.35.6.443.2040

Incropera, F., Dewitt, D. (2001). Fundamentals of Heat and Mass Transfer (Fifth Edition), John Wiley & Sons. https://bcs.wiley.com/he-bcs/Books?action=index&itemId=0471386502&itemTypeId=BKS&bcsId=1737

Tang, Y. Q., Shi, N. (2004) Electric Machinery (Second Edition), China Machine Press.