CHROME FREE RAPID GLOVE LEATHER MANUFACTURE
DOI:
https://doi.org/10.29121/granthaalayah.v9.i2.2021.3497Keywords:
Chrome Free, Glove Leather, AcrylicAbstract [English]
In the current study, we use chrome free tanning process for the production of glove leather and to achieve the required properties without any compromising the quality. To develop a suitable post tanning system for making glove with good softness, run and strength properties. Glove leather predominantly made using chrome tanning system. Conventionally glove leather is done by long liming and ageing in pickling for better fibre splitting in order to achieve the run property. Production Time is very high due to long liming and ageing in pickling. Production cost can significantly reduce if the processing time for making glove is reduced. Acrylic followed by Glutaraldehyde combination tanning system adopted for chrome free tanning option. Long liming and ageing in pickle will be replaced with rapid fibre splitting process.
Downloads
References
Bower J.H.relation between Run & Physical properties JSLT 26,181,1942
Fein M.L.Viola s,J.Luvisi,fop.naghski J.A rapid test for resistance of glove leather to perspiration –technical note JALCA 67,136,1972
Ferd ‘o’ Flaherty the chemistry & technology of leather manufacture vol-2 Newyork, 1972
Viola Fein m.l.nag ski j,washablity of gluteraldehyde-chrome tanned garment & glove leather-JALCA
Iup 2 sampling JSLTC 84,303-309,2000 DOI: https://doi.org/10.1006/enrs.2000.4099
Iup 6 measurement of Tensile strength & % of elongation at break, JSLTC 84,317,2000
Iup 8 measurement of Tear load JSLTC 84,327,2000 DOI: https://doi.org/10.1067/mpr.2000.109378
Iup 36 measurement of softness Jlstc 84,317,2000 DOI: https://doi.org/10.1017/S002555720020822X
Glove leather manufacture from sheep skins: Influence of fatliqours and Syntans on the gloving properties, JALCA 103, 182-200,2008
Process for Manufacturing of glove leather from sheep from industry (NRS CHEMI SERVICES) Vaniyambadi.
Wolf G, Breth M, Igl G (2001) J Am Leather Chemists Assoc 96:111
Palop R (2003) Leather International, May 2003, 27–33 DOI: https://doi.org/10.1097/00149078-200303010-00004
Schwaiger W (2001) Leather International, July 2001, 28–30 DOI: https://doi.org/10.1108/prt.2001.12930ead.006
Fennen J (2003) 99th American Leather Chemist Association annual meeting, June 2003, 19–22
Liu C-K, Latona NP, Lee J (2005) J Am Leather Chemists Assoc 100:8
Liu C-K, Latona NP (2006) J Am Leather Chemists Assoc 101:330
Liu C-K, Latona NP, Lee J (2005) J Am Leather Chemists Assoc 100:102
Liu C-K, Latona NP, Cooke P (2007) J Am Leather Chemists Assoc 102:68
Liu C-K, Dimaio GL (2000) J Am Leather Chemists Assoc 95:102
Liu C-K, Dimaio GL (2001) J Am Leather Chemists Assoc 96:243
Liu C-K, Latona NP, Dimaio GL (2002) J Am Leather Chemists Assoc 97:284
Liu C-K, Latona NP, Dimaio GL (2002) J Am Leather Chemists Assoc 96:243
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.