EXPERIMENTAL STUDY AND ANALYSIS OF FLAT BELT CONVEYER SYSTEM WITH DIFFERENT WEIGHT CONDITION
DOI:
https://doi.org/10.29121/granthaalayah.v8.i12.2020.2974Keywords:
Different Weight Of Material, Conveyor Belt, D.C. MotorAbstract [English]
A conveyor belt system essentially consists of an endless belt of elastic material connected between two flat pulleys and driven by the rotation of one of the pulleys by a direct current motor. Usually, the material is fed to the belt near the other end of the pulley. The moving belt that carries the material to the drive pulley tends to sag between the two end pulleys due to its own weight. Rubber conveyor belts are commonly used to transport items with uneven bottom surfaces, small items that fall between rolls, or product bags that sag between rolls.
Downloads
References
Jian Sun, “Simulative calculation and optimal design of scissor lifting mechanism”, 2009.
Beizhi Li, “Development of a Reconfigurable Welding Fixture System for Automotive Body”, 2009.
krol r., jurdziak. Economy of Belt Conveyor Idlers Renovation Based on Results of Laboratory Tests”. Industrial Transport, vol. 2, 2008.
kwasniewski “Diagnostics of steel cords belts Industrial, Transport”, vol. 4, pp. 22–24. 2006.
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.