HIGH-SPEED QUECHING OF HIGH CARBONSTEEL
DOI:
https://doi.org/10.29121/granthaalayah.v7.i12.2019.297Keywords:
Quenching, Acquisition, High-Speed QuenchingAbstract [English]
Medium and high carbon steels are usually quenched in polymer and oil in order to avoid cracking and distortion; however, recent studies have proved that it is possible to minimize cracking using water as a coolant of these steels by promoting extremely high cooling rates. By great agitation and velocity of quench ant, the vapour blanket is reduced or prevented during water quench, allowing uniform hardening of the surface. In this study, the cooling severity of a spray quenching system and a high-speed quenching chamber are studied. Cylindrical samples of AISI 304 stainless steel (20mm in diameter and 100mm length) were employed to characterize the cooling severity. Thermal data was acquired through K-type thermocouples placed in the sample at three positions, 1mm below surface, mid-radius and at centre of the specimen, connected to a data acquisition system. High thermal gradients were observed in both systems, being the high-speed chamber the severest cooling. The maximum cooling rate obtained at the surface was 470 and 300C/s for the high-speed chamber and the spray system, respectively. In addition, 5160 spring steel samples were quenched for short times in both systems; the cooling was interrupted to avoid through transformation and to produce a case-core type microstructure. Different cooling times were used for the interrupted quenching to modify the marten site case thickness. No cracks.
Downloads
References
Totten, G. E., Bates, C. E., and Clinton, N. A., Other Quenching Processes, Handbook of Quenchants and Quenching Technology, ASM International, Materials Park, OH, 1993.
Liscic, B. and Filetin, T., “Measurement of Quenching Intensity, Calculation of Heat Transfer Coefficient and Global Database of Liquid Quenchants,” Mater. Eng., Vol. 19, 2012, pp. 52–63.
Scott, H., The Problem of Quenching Media for the Hardening of Steel, Heat Transfer Symposium, ASM International, Materials Park, OH, 1933.
Liscic, B., Tensi, H. M., Canale, L.C. F., and Totten, G. E., Quenching Theory and Technology, 2nd ed., CRC Press, Boca Raton, FL, 2010. DOI: https://doi.org/10.1201/9781420009163
Kobasko, N. I., Arononov, M. A., Powell, J. A., and Totten, G. E., “Intensive Quenching Systems: Engeneering and Desing,” ASTM International, West Conshohocken, PA, 2010. DOI: https://doi.org/10.1520/MNL64-EB
ASM International, Properties and Selection: Irons Steels and High Performance Alloys, ASM Handbook, Vol. 1, ASM International, Materials Park, OH, 1990.
Lozano, D. E., Mercado-Sol´ıs, R. D., Cola´s, R. Canale, L. F., and Totten, G. E., “Surface Temperature and Heat Transfer Coefficient Determination During Quenching for Martensite Fraction Prediction Using a Parabolic Heat Transfer Model,” Proceedings of the 6th International Quenching and Distortion Control Conference, Chicago, IL, Sept 9–13, 2012, pp 746–754.
Swanson, H. E., Fuyat, R. K., and Ugrinic, G. M., “X-Ray Diffraction Powder Patterns,” Circ. 539, The National Bureau of Standards, Gaithersburg, MD, 1955.
Cullity, B. D., Elements of X-Ray Diffraction, 3rd ed., Addison-Wesley, Boston, MA, 1956.
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.