ANALYZED SOIL IMPROVEMENT BASED GYPSUM AND CEMENT IN SOIL CLAY
DOI:
https://doi.org/10.29121/granthaalayah.v7.i12.2019.295Keywords:
CBR, Curing Time, Gypsum, Cement StabilizationAbstract [English]
Land is an important element of the structure underneath a construction, so that the soil must have a good carrying capacity. But the reality on the ground is that many soils have low carrying capacity, so it is necessary to stabilize the soil with gypsum and cement. This study aims to determine the effective percentage of gypsum and cement addition and the effect of the addition of Gypsum and Cement to physical changes in clay soil in terms of the CBR (California Bearing Ratio) value of the curing time. This research was conducted in the laboratory, by testing the physical properties of the soil and the carrying capacity of the soil (CBR) with variations in the addition of gypsum and cement by 1%, 3%, and 5% with a long curing time of 1, 7, and 14 days . Sample testing is carried out with two treatments, namely soil samples are first cured and then compacted and the sample is solidified first and then cured. From the research results obtained the largest CBR (California Bearing Ratio) value occurs in the variation of the addition of Gypsum and Cement 5% with the length of time for soil specimens to be compacted first before curing is equal to 41.54%, this is due to the mixture of soil with gypsum and cement has been manjai solid before the collection can occur, the cavities between soil particles also become solid, so that the strength also increases. From the California Bearing Ratio results, it can be seen that the addition of gypsum and cement to clay soil shows an increase in the value of California Bearing Ratio on clay.
Downloads
References
Andriany,dkk, 2012, “Pengaruh Penggunaan Semen Sebagai Bahab Stabilisasi pada Lempung Daerah Lambung Bukit Terhadap Nilai CBR Tanah”, Jurnal Rekayasa Sipil. Volume 8 2012. ISSN 1858-2133.Universitas Andalas. DOI: https://doi.org/10.25077/jrs.8.1.29-44.2012
Bidang Geoteknik di Pusat Penelitian dan Pengembangan Prasarana Transportasi Departemen Pekerjaan Umum. Das Braja M, 1985. Mekanika Tanah (Prinsip-Prinsip Rekayasa Geoteknis), Jilid II, Erlangga, Jakarta.
Das Braja M, 1988. Mekanika Tanah (Prinsip-Prinsip Rekayasa Geoteknis) Jilid I, Erlangga, Jakarta.
Departemen Pekerjaan Umum, 1987. Standar Konstruksi Bangunan Indonesia.
No.378/KPTS/1987. Jakarta.
Departemen Pekerjaan Umum. Pedoman Bahan Konstruksi Bangunan dan Rekayasa Sipil, 2007. Perencanaan Stabilisasi Tanah dengan Bahan Serbuk Pengikat Untuk Konstruksi Jalan. Jakarta.
Departemen Pekerjaan Umum. Pelaksanaan Stabilisasi Bahan Jalan Langsung di Tempat Dengan Bahan Serbuk Pengikat, Jakarta.
Eko, 2011, Stabilitas Tanah Lempung dengan Menggunakan Kapur Padam, Tugas Akhir, Universitas Bangka Belitung, Bangka.
Hary Christady, 2011, Analisis dan Perencanaan Fondasi, Cetakan kedua, Gajah Mada University Press, Yogyakarta.
Hardiyantmo, H.C. 2006. Mekanika Tanah I Gadjah Mada University Press, Jogjakarta.
Herina Silvia, 2005. Kajian Pemanfaatan Abu Sekam Padi Untuk Stabilisasi Tanah Dalam Sistem Pondasi di Tanah Expansif, Pusat Penelitian dan Pengembangan Pemukiman Departemen Pekerjaan Umum.
Pusat Penelitian dan Pengembangan Prasarana Transportasi Departemen Pekerjaan Umum. Vemmy, dkk, 2013, Pengaruh Penambahan Serbuk Gypsum dengan Lamanya Waktu Pengeraman (curing) terhadap Karakteristik Tanah Lempung Ekspansif di Bojonegoro, Jurnal Penelitian, Universitas Brawijaya Malang, Malang.
Maryati, 2016 Analisis Perbandingan Penggunaan Limbah Gypsum dengan Semen sebagai bahan Stabilisasi Tanah lempung.
Vorobieff George, 2003. Anew Approach To Pavement Design Using Lime Stabilised Subsgrades, Australia.
Wiqomah Qunik, 2006. Pengaruh Kadar kapur, Waktu Perawatan dan Perendaman Terhadap Kuat Dukung Tanah Lempung, Universitas Muhammadiyah Surakarta.
Yayuk Apriyanti, 2016. Peningkatan Nilai CBR Tanah Lempung Dengan Menggunakan Semen Untuk Timbunan.
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
