FIBROUS SILICA-HYDROXYAPATITE COMPOSITE BY ELECTROSPINNING
DOI:
https://doi.org/10.29121/granthaalayah.v5.i2.2017.1701Keywords:
Nanofibers, Electrospinning, Hydroxyapatite, Nanocomposite, GlassAbstract [English]
New nanocomposite membrane was fabricated by electrospinning. The nanocomposite combines a glass and hydroxyapatite (HA). This research proposed the incorporation of glass to counteract the brittleness of HA in a composite formed by coaxial fibers which will be used for bone replacement. Calcium phosphate ceramics are used widely for dental and orthopedic reasons, because they can join tightly through chemical bonds and promote bone regeneration. Precursors HA and SiO2 were synthetized through the sol-gel method and then incorporated into a polymeric PVP matrix; later they were processed by coaxial electrospinning to obtain fibers with an average diameter of 538 nm which were characterized with techniques such as Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy, Differential Thermal Analysis and Scanning Electron Microscopy. Chemical and physical characterization of the membranes evidenced fibers in a coaxial disposition with a glass core and hydroxyapatite cover. The micro-porous fibers have many potential uses in the repair and treatment of bone defects, drug delivery and tissue engineering. Through ATR-FTIR and SEM-EDX analysis the presence of characteristic chemical groups, the fiber composition and microstructure were determined.
Downloads
References
Basu B, Balani K. Advanced Structural Ceramics. New Jersey: John Wiley & Sons, Inc., 2011:393-421, 67-75. DOI: https://doi.org/10.1002/9781118037300
Bocaccini A. Ceramics. In: Hench LL, Jones J, eds. Biomaterials, artificial organs and tissue engineering. Cambridge: Woodhead Publishing Limited, 2005:26-36.
Dinarvand P, Seyedjafari E, Shafiee A, Jandaghi AB, Doostmohammadi A, Fathi MH, Farhadian S, Soleimani M. New Approach to Bone Tissue Engineering: Simultaneous Application of Hydroxyapatite and Bioactive Glass Coated on a Poly (L-lactic acid) Scaffold. ACS Appl Mater Interfaces 2011; 3:4518-4524. DOI: https://doi.org/10.1021/am201212u
Hench LL, Kokubo T. Properties of bioactive glasses and glass-ceramics. In: Black J, Hastings G, eds. Handbook of Biomaterial Properties. London: Chapman & Hall, 1998:355-405.
Lee J, Kim Y. Hydroxyapatite nanofibers fabricated through electrospinning and sol–gel process. Ceram Int 2014; 40:3361-3369. DOI: https://doi.org/10.1016/j.ceramint.2013.09.096
Leeuwenburgh SCG, Wolke JGC, Jansen JA; De Groot K. Calcium phosphates coatings. In: Kokubo T, ed. Bioceramics and their clinical applications. Cambridge: Woodhead Publishing Limited, 2008:464-484.
Liu D, Troczynski T, Tseng WJ. Water-based sol-gel synthesis of hydroxyapatite: process development. Biomaterials 2001; 22:1721-1730. DOI: https://doi.org/10.1016/S0142-9612(00)00332-X
López-Esparza J, Espinosa-Cristóbal LF, Donohue-Cornejo A, Reyes-López SY. (2016). Antimicrobial Activity of Silver Nanoparticles in Polycaprolactone Nanofibers against Gram-Positive and Gram-Negative Bacteria. Ind Eng Chem Res 2016;55(49):12532-12538.
Meejoo S, Maneeprakorn W, Winotai P. Phase and thermal stability of nanocrystalline hydroxyapatite prepared via microwave heating. Thermochim Acta 2006; 447:115-120. DOI: https://doi.org/10.1016/j.tca.2006.04.013
Reyes-López SY, Cornejo-Monroy D, González-García G. A novel route for the preparation of Gold nanoparticles in Polycaprolactone nanofibers. J Nanomater 2015; 16(1):153. DOI: https://doi.org/10.1155/2015/485121
Roque-Ruiz J., Cabrera-Ontiveros E., Torres-Pérez J. and Reyes-López S., Preparation of PCL/Clay and PVA/Clay Electrospun Fibers for Cadmium (Cd+ 2), Chromium (Cr+ 3), Copper (Cu+ 2) and Lead (Pb+ 2) Removal from Water, Water, Air, & Soil Pollution, 2016, 227,8,1-17. DOI: https://doi.org/10.1007/s11270-016-2990-0
Roveri N, Falini G, Sidoti MC, Tampieri A, Landi E, Sandri M, Parma B. Biologically inspired growth of hydroxyapatite nanocrystals inside self-assembled collagen fibers. Mater Sci Eng C 2003; 23:441-446. DOI: https://doi.org/10.1016/S0928-4931(02)00318-1
Tian M, Gao Y, Liu Y, Liao Y, Xu R, Hedin NE, Fong H. Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals. Polymer 2007; 48:2720-2728. DOI: https://doi.org/10.1016/j.polymer.2007.03.032
Tian L, Zi-qiang S, Jian-quan W, Mu-jia G. Fabrication of hydroxyapatite nanoparticles decorated cellulose triacetate nanofibers for protein adsorption by coaxial electrospinning. Chem Eng J 2015; 260:818-825. DOI: https://doi.org/10.1016/j.cej.2014.09.004
Sun B, Duan B, Yuan X. Preparation of Core/Shell PVP/PLA Ultrafine Fibers by Coaxial Electrospinning. J Appl Polym Sci 2006; 102:39-45. DOI: https://doi.org/10.1002/app.24297
Zafar M, Najeeb S, Khurshid Z, Vazirzadeh M, Zohaib S, Najeeb B, Sefat F. Potential of electrospun nanofibers for biomedical and dental applications. Materials 2016; 9:73. DOI: https://doi.org/10.3390/ma9020073
Zhao Y, Wang H, Lu X, Li X, Yang Y, Wang C. Fabrication of refining mesoporous silica nanofibers via electrospinning. Mater Lett 2008; 62:143-146. DOI: https://doi.org/10.1016/j.matlet.2007.04.096
Downloads
Published
How to Cite
Issue
Section
License
With the licence CC-BY, authors retain the copyright, allowing anyone to download, reuse, re-print, modify, distribute, and/or copy their contribution. The work must be properly attributed to its author.
It is not necessary to ask for further permission from the author or journal board.
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.