THE DEVELOPMENT OF METROLOGY INFORMATION SYSTEM
Metrology services are carried out in order to protect the consumers and producers in terms of obtaining fair rights in trade transactions. The Metrology Center as the implementor of metrology still faces obstacles in the implementation of its services, currently the service has only reached 24.7% of the total metrology equipment used. Obstacles that occur in addition to the problem of inadequate facilities and infrastructure are also because the process of capturing metrological data is still done manually using many paper documents. In each service element, there are various kinds of documents that must be filled out manually and in the end these documents will be archived separately. This flow of data and information has not been well documented, although the output data from this process will be processed into metrology information that will be used by management above it in making decisions. Metrology Information System was developed to overcome the obstacles that exist in The Metrology Center, in addition to supporting the performance of The Metrology Center as well for the success of E-Government. The development of a metrological information system uses the System Development Life Cycle (SDLC) method with a Business Process re-engineering approach for metrology services.
Akbar, R., Hasan, A. and Novya, A. (2015). Perancangan Aplikasi Web Dengan Fitur Mobile Pada Pelayanan Tera Alat Ukur Takar Timbang Dan Perlengkapan (Studi Kasus: UPTD Balai Metrologi Dinas Perindustrian dan Perdagangan Provinsi Sumatera Barat). Jurnal TEKNOIF, Vol. 3 No. 1, April 2015, 1-11.
Carbone, P., Buglione, L., Mari, L. and Petri, D. (2008). A Comparison between Foundations of Metrology and Software Measurement. IEEE Transactions on Instrumentation and Measurement, Vol. 57, No. 2, 2008, 235-241. https://doi.org/10.1109/TIM.2007.909614 DOI: https://doi.org/10.1109/TIM.2007.909614
Gorkhali, A., and Da Xu, Li. (2017). Enterprise Architecture: A Literature Review. Journal of Industrial Integration and Management Vol. 02, No. 02, 1750009, 2017. Retrieved from https://doi.org/10.1142/S2424862217500099 DOI: https://doi.org/10.1142/S2424862217500099
Kementerian Perdagangan Republik Indonesia (2013). Analisis Penggunaan Alat-Alat Ukur, Takar, Timbang dan Perlengkapannya (TMDW) Dalam Perdagangan Barang. Pusat Kebijakan Perdagangan Dalam Negeri Badan Pengkajian dan Pengembangan Kebijakan Perdagangan Kementerian Perdagangan Jakarta, 2013.
Mutiara, N., Andreswari, R. and Hanafi, R. (2017). Analisis Dan Perancangan Enterprise Architecture Direktorat Metrologi Pada Fungsi Perencanaan Dan Operasional Menggunakan Framework Togaf Adm". Jurnal Rekayasa Sistem & Industri Vol. 4, No. 1, Juni 2017, 22-30. Retrieved from https://doi.org/10.25124/jrsi.v4i01.158 DOI: https://doi.org/10.25124/jrsi.v4i01.158
Nakakawa, A., Van Bommel, P., and Proper, H. A. E. (2013). Supplementing Enterprise Architecture Approaches With Support For Executing Collaborative Tasks - A Case Of Togaf Adm". International Journal of Cooperative Information Systems (draft version) Vol. 22, No. 02,1-72. Retrieved from https://doi.org/10.1142/S021884301350007X DOI: https://doi.org/10.1142/S021884301350007X
Osvalds, G. (2001). Definition of Enterprise Architecture-centric Models for The Systems Engineer. Eleventh Annual International Symposium of the International Council on Systems Engineering (INCOSE), Melbourne, Victoria, Australia, 2001, 1-7. Retrieved from https://doi.org/10.1002/j.2334-5837.2001.tb02278.x DOI: https://doi.org/10.1002/j.2334-5837.2001.tb02278.x
Petri, D., Mari, L. and P. Carbone, P. (2015). A Structured Methodology for Measurement Development," in IEEE Transactions on Instrumentation and Measurement, Vol. 64, No. 9, Sept. 2015, 2367-2379. Retrieved from https://doi.org/10.1109/TIM.2015.2399023 DOI: https://doi.org/10.1109/TIM.2015.2399023
Pusat Penelitian dan Pengembangan Perdagangan Dalam Negeri (2007). Kajian Sistem Metrologi Legal. BPPP, Departemen Perdagangan, dan Arah Cipta Guna. Jakarta, 2007.
Rodrigues Filho, B.A., Soratto, A.N.R., and Gonçalves, R.F. (2016). Information Systems as a Tool To Improve Legal Metrology Activities. Journal of Physics Conference Series, 733, July 2016, 1-7. Retrieved from https://doi.org/10.1088/1742-6596/733/1/012008 DOI: https://doi.org/10.1088/1742-6596/733/1/012008
Romero, D. and Vernadat, F. (2016). Enterprise Information Systems State of The Art: Past, Present and Future Trends. Computers in Industry, Vol. 79, June 2016, 3-13. Retrieved from https://doi.org/10.1016/j.compind.2016.03.001 DOI: https://doi.org/10.1016/j.compind.2016.03.001
Santoso, B. J., and Affandi, A. (2016). Model Arsitektur Enterprise Institusi Pengujian dan Kalibrasi Alat Kesehatan. TEKNOLOGI, Vol. 6, No.1, 1-7. Retrieved from https://doi.org/10.26594/teknologi.v6i1.554 DOI: https://doi.org/10.26594/teknologi.v6i1.554
UNCTAD/WTO. (2004). Legal Metrology and International Trade. International Trade Centre, Geneva, Switzerland, Buletin No. 74, June, 2004.
Unterkalmsteiner, M., Gorschek, T., Moinul Islam, A.K.M., Cheng, C.K and Permadi, R.B. (2011). Evaluation and measurement of software process improvement-a systematic literature review. IEEE Transactions on Software Engineering Vol. 38, No.2, November 2011, 398-424. Retrieved from https://doi.org/10.1109/TSE.2011.26 DOI: https://doi.org/10.1109/TSE.2011.26
Yulianto, A.D. (2014). Perancangan Sistem Informasi Kemetrologian dalam Pendekatan Business Process Reengineering untuk Pelayanan Tera. Jurnal Nasional Teknik Elektro dan Teknologi Informasi, Vol. 03, No. 3, Agustus 2014, 174-178.
Copyright (c) 2021 Henny Medyawati, Abdus Syakur, Budi Setiawan, Imam Ahmad Trinugroho
This work is licensed under a Creative Commons Attribution 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section