• Rajeev Sharma School of Manufacturing Skills, Bhartiya Skill Development University, Jaipur, India
  • Binit Kumar Jha School of Manufacturing Skills, Bhartiya Skill Development University, Jaipur, India
  • Vipin Pahuja School of Manufacturing Skills, Bhartiya Skill Development University, Jaipur, India
Keywords: Sustainable Machining, Cryogenic Machining, MQL, Dry Machining, Duplex Stainless steel


Customary mineral based liquids are as a rule broadly utilized in cooling and greases in machining activities. Nonetheless, these cutting liquids are the suitable wellspring of numerous natural and organic issues. To kill the evil impacts related with cutting liquids, it is important to move towards practical machining methods. Such sustainable machining techniques utilize minimize the amount of cutting liquid, fluid nitrogen, vegetable oil or packed air as a cooling-oil medium. The liquids utilized in economical machining strategies are viewed as absolutely biodegradable and Eco-friendly. This paper is a careful survey of the relative multitude of current environmental friendly machining methods as of now rehearsed in the metal cutting cycle. It has been likewise discovered that these economical machining strategies more often than not give better outcomes as far as improved surface nature of the machined part, upgraded apparatus life, less cutting temperatures and slicing powers when contrasted with traditional wet machining techniques. The principle motivation behind this survey work is to recognize the diverse supportable strategies and empower the utilization of such procedures in metal machining, so that, the reducing interaction turns out to be more expense powerful and climate inviting.


Jayal, A.D., Badurdeen, F., Dillon Jr., O.W., Jawahir, I.S., 2010. Sustainablemanufacturing: modeling and optimization challenges at the product, processand system levels. CIRP J. Manuf. Sci. Technol. 2, 144e152. DOI:

R. Sharma, Binit Kumar Jha and V. Pahuja, Impact of environmental friendly machining on machinability: A review, Materials Today: Proceedings, DOI:

Abdalla, H.S., Patel, S., 2006. The performance and oxidation stability of sustainable metal working fluid derived from vegetable extracts. Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 220, 2027e2040. DOI:

Pusavec, F., Krajnik, P., Kopac, J., 2010a. Transitioning to sustainable production e Part I: application on machining technologies. J. Clean. Prod. 18, 174e184. DOI:

Brockhoff, T.,Walter, A., 1998. Fluid minimization in cutting and grinding: abrasives. J. Abras. Eng. Soc. Butl. 38e42.

Abdalla, H.S., Baines, W., McIntyre, G., Slade, C., 2007. Development of novel sustainable neat-oil metal working fluids for stainless steel and titanium alloy machining. Part 1. Formulation development. Int. J. Adv. Manuf. Technol. 34, 21e33. DOI:

Marksberry, P.W., 2007. Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly. J. Clean. Prod. 15, 958e971. DOI:

Lawal, S.A., Choudhury, I.A., Nukman, Y., 2012. Application of vegetable oil-based metalworking fluids in machining ferrous metalsdA review. Int. J. Mach. Tools Manuf. 52, 1e12. DOI:

Hannu, T., Suuronen, K., Aalto-Korte, K., Alanko, K., Luukkonen, R., J€arvel€a, M., Jolanki, R., Jaakkola, M., 2013. Occupational respiratory and skin diseases among Finnish machinists: findings of a large clinical study. Int. Arch. Occup. Environ. Health 86, 189e197. DOI:

Dixit, U.S., Sarma, D.K., Davim, J.P., 2012. Environmentally Friendly Machining, First ed. Springer, New York, USA. DOI:

Obi, S.C., 2013. Introduction to Manufacturing Systems, First ed. Author House, Bloomington, USA.

Schultheiss, F., Zhou, J., Gr€ontoft, E., Ståhl, J.-E., 2013. Sustainable machining through increasing the cutting tool utilization. J. Clean. Prod. 59, 298e307. DOI:

Rajeev Sharma et al 2020 IOP Conf. Ser.: Mater. Sci. Eng. 998 012013. DOI:

U. Kumar, P. Senthil, A comparative machinability study on titanium alloy Ti- 6Al-4V during dry turning bt cryogenic treated and untreated condition of uncoated WC inserts, Mater. Today Proc. (2019) 2214–7853. DOI:

K.K. Wika, O. Gurdal, P. Litwa, C. HitchensC.,, Influence of supercritical CO2 cooling on tool wear and cutting force in the milling of Ti-6Al-4V, Procedia CIRP 82 (2019) 89–94. DOI:

R. Periyasamy, V. Gopinath, G. Selvakumar, R.A. Kingsslly, S. Logeshwaran, (2020). Evalution of the effect of cryogenic treatment of HSS drills in drilling SS310. Mater. Today Proc.

Y. Sun, D.A. Puleo, J. Schoop, I.S. Jawahir, Improved surface integrity from cryogenic machining of Ti- 6Al-7Nb alloy for biomedical application, Procedia CIRP 45 (2016) 63–66. DOI:

S. Ravi, P. Gurusamy, (2020). Experimental investigation on performance of TiN and TiAlN coated tools in cryogenic milling of AISI D2 hardened steel. Mater. Today Proc.

N.A. Ozbek, (2020). Effect of cryogenic treatement types on the performacce of coated tungsten tools in the turnining of AISI H11 steel. J. Mater. Res. Technol.

M. Dhananchezian, M.R. Priyan, G. Rajashekar, S.S. Narayanan, Study the effect of cryogenic cooling on machinability characteristics during turning duplex stainless steel 2205, Mater. Today Proc. 5 (2017) 12062–12070. DOI:

S.K. Khare, S. Agarwal, Optimization of machining parameters in turning of AISI 4340 steel under cryogenic condition using Taguchi technique, Procedia CIRP 63 (2017) 610–614. DOI:

G.C. Nie, X.M. Zhang, D. Zhang, H. Ding, An experimental study of the white layer formation during cryogenic assisted hard machining of AISI 52100 steel, Procedia CIRP 77 (2018) 223–226. DOI:

C. Vakkas, Experimental comparison of the performance of nano fluids, cryogenic and hybrid cooling in turning of inconel 625, Tribol. Int. 137 (2019) 366–378. DOI:

V. Sivalingam, J. Sun, B. Yang, K. Liu, R. Raju, Machining performed and tool wear analysis on cryogenic treated inserts during end milling of Ti-6Al-4V alloy, J. Manuf. Processes 36 (2018) 188–196. DOI:

Z. Pu, J.C. Outeiro, A.C. Batista, O.W. Dillon, D.A. Puleo, I.S. Jawhar, Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components, Int. J. Mach. Tools Manuf. 56 (2012) 17–27. DOI:

S. Chetan, P.V. Ghosh, P.V. Rao, Comparison between sustainable cryogenic techniques and nano—MQL cooling mode in turning of nickel- based alloy, J. Cleaner Prod. 231 (2019) 1036–1049. DOI:

How to Cite
SHARMA, R., Jha, B. K., & Pahuja, V. (2021). ROLE OF SUSTAINABLE TECHNIQUES IN MANUFACTURING PROCESS: A REVIEW. International Journal of Engineering Technologies and Management Research, 8(2), 41-45.