IMPACT OF CIRCULAR CONSTRUCTION ON DEMOLITION WASTE MANAGEMENT IN THE INDIAN CONSTRUCTION INDUSTRY
In recent times due to the Indian economic growth, there is a surge in construction activities. This surge has led to an excess amount of demolition waste that is produced. According to the Building Material Promotion Council, India generates an estimated 150 million tons of C and D waste every year. Some existing initiatives and the significant stakeholders' involvement have created the demolition waste management systems essential in the building’s demolition phase. The research in the C and D and Awareness program for C and D waste that initiated has led to the implementation of some waste management systems in the building's demolition phase. In India, the amount of demolition waste produced is higher than the construction waste produced while constructing buildings. So, it is essential for the demolition waste mitigation plan in the building's demolition phase. The study aims to know circular construction and current demolition waste management performance in the Indian construction industry. Through literature review, demolition waste management systems that are carried out all around the world are collected. The current practices carried out by diﬀerent stakeholders practicing in India are known through a questionnaire survey. Data interpretation is made using the data collected in the literature review and the questionnaire survey. This research identified the signiﬁcant beneﬁts, barriers, and motivation factors to implement the waste management system, and proposing any necessary changes. Designer innovation and BIM deconstruction is considered as one of the barrier-breaking innovation in adopting the circular construction.
M. H. Z. Faruqi and F. Z. Siddiqui, “A mini-review of construction and demolition waste management in India,” Waste Manag. Res., vol. 38, no. 7, pp. 708–716, 2020, DOI: 10.1177/0734242X20916828. DOI: https://doi.org/10.1177/0734242X20916828
S. H. Ghaffar, M. Burman, and N. Braimah, “Pathways to circular construction: An integrated management of construction and demolition waste for resource recovery,” J. Clean. Prod., vol. 244, p. 118710, 2020, DOI: 10.1016/j.jclepro.2019.118710. DOI: https://doi.org/10.1016/j.jclepro.2019.118710
K. G. S. B. Vidyasekar, “Implementation of 3R Principle in Construction and Demolition Waste Management,” Int. J. Innov. Technol. Explor. Eng., vol. 8, no. 12, pp. 977–980, 2019, DOI: 10.35940/ijitee. DOI: https://doi.org/10.35940/ijitee
Building Materials and Technology Promotion Council, Utilisation of Recycled Produce of Construction & Demolition Waste A Ready Reckoner. 2018.
A. L. Narayanan and D. Srinivas, “GUIDELINES FOR THE FORMULATION OF INDIAN CODE OF PRACTICE FOR CONSTRUCTION AND DEMOLITION WASTES,” vol. 4, no. 1, pp. 5–10, 2016.
K. T. Adams, “Circular economy in construction: current awareness, challenges, and enablers,” vol. 170, pp. 15–24, 2017. DOI: https://doi.org/10.1680/jwarm.16.00011
P. Kamrath, Demolition techniques and production of construction and demolition waste (CDW) for recycling. Woodhead Publishing Limited, 2013. DOI: https://doi.org/10.1533/9780857096906.2.186
C. P. Ginga, J. M. C. Ongpeng, and M. K. M. Daly, “Circular economy on construction and demolition waste: A literature review on material recovery and production,” Materials (Basel)., vol. 13, no. 13, pp. 1–18, 2020, DOI: 10.3390/ma13132970. DOI: https://doi.org/10.3390/ma13132970
J. Thomas and P. M. Wilson, “Open Access Construction waste management in India American Journal of Engineering Research (AJER),” pp. 9–12, 2013.
“Circular Economy in Construction - Experiences from Finland,” 2019.
Central Pollution Control Board, “Guidelines on Environmental Management of Construction & Demolition (C & D) Wastes, Ministry of Environment, Forests & Climate Change, Government of India.,” vol. 1, no. March 2017.
I. Standard, “Demolition of Buildings - Codeofsafety,” Marg, no. December 1991, 1996.
S. H. (Centra. P. H. and E. E. O. (CPHEEO)) Schneider, “Municipal solid waste management manual,” Energy Conversion, Second Ed., pp. 73–79, 2017, DOI: 10.1201/9781315374192. DOI: https://doi.org/10.1201/9781315374192
J. Kirchherr et al., “Barriers to the Circular Economy: Evidence from the European Union (EU),” Ecol. Econ., vol. 150, no. December 2017, pp. 264–272, 2018, DOI: 10.1016/j.ecolecon.2018.04.028. DOI: https://doi.org/10.1016/j.ecolecon.2018.04.028
Copyright (c) 2021 kranti kumar myneni, Rajan D
This work is licensed under a Creative Commons Attribution 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section