STUDY ON MAGNETIZATION TREATMENT AND CUTTING PERFORMANCE OF A NEW-TYPE OF TRIETHANOLAMINE BORATE CUTTING FLUID

  • Yong Yang School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
  • Guofang Hu School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
  • Wanxu Liang School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
  • Kang Jin School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
  • Li Xiong School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
  • Shuo Hou School of Mechanical and Automotive Engineering, Qingdao University of Technology, 266520 Qingdao, China.
Keywords: Triethanolamine Borate, Water Based Cutting Fluid, Magnetization Treatment

Abstract

The composition of water-based cutting fluid and emulsion is different, and it has not been reported whether the magnetization treatment will affect the performance of water-based cutting fluid. In this study, a newly developed triethanolamine borate water-based cutting fluid is used as the research object to study the magnetization treatment technology and the law of its influence on cutting performance systematically. The cutting fluid magnetization experimental system was set up based on the principle of magnetization and the influence of magnetization parameters (magnetic field strength, magnetization duration) on the results of magnetization was further studied. The experimental results are measured by force measuring instrument, temperature measuring instrument, roughness measuring instrument and scanning electron microscope, and the parameters such as milling force, milling temperature, surface roughness, cutting specific energy, friction coefficient and workpiece surface morphology are comprehensively analyzed through data processing; the performance of cutting fluid before and after magnetization is also compared. The test results show that the magnetization effect is best when the magnetic field strength is 10000GS and the magnetization time is 40 minutes. The mechanism of magnetization treatment is to change the macromolecular group into a small molecular group, and the disordered array of molecules becomes ordered.

Downloads

Download data is not yet available.

References

Eguti C C A, Trabasso L G. Design of a robotic orbital driller for assembling aircraft structures[J]. Mechatronics, 2014, 24(5):533-545. DOI: https://doi.org/10.1016/j.mechatronics.2014.06.007

Denkena B, Boehnke D, Dege J H. Helical milling of CFRP–titanium layer compounds[J]. CIRP Journal of Manufacturing Science and Technology, 2008, 1(2):64-69. DOI: https://doi.org/10.1016/j.cirpj.2008.09.009

Dorlin, Theo, Fromentin G, Costes J P. Generalised cutting force model including contact radius effect for turning operations on Ti6Al4V titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2016.

Bui V H, Gilles P, Sultan T, et al. A new cutting depth model with rapid calibration in abrasive water jet machining of titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2017. DOI: https://doi.org/10.1007/s00170-017-0581-x

Yang Y, Zhang C, Dai Y, et al. Lubricity and Adsorption of Castor Oil Sulfated Sodium Salt Emulsion Solution on Titanium Alloy[J]. Tribology Letters, 2019. DOI: https://doi.org/10.1007/s11249-019-1173-8

Zhao D. Development and application of titanium alloy in aviation field [J]. Foundry, 2014,63 (11): 1114-1117

Liu J. Characteristics and application of titanium alloy [J]. Non ferrous metal processing, 2002,31 (04): 1-9 + 59

Ezugwu E O. Key improvements in the machining of difficult-to-cut aerospace superalloys[J]. International Journal of Machine Tools & Manufacture, 2005, 45(12-13):1353-1367. DOI: https://doi.org/10.1016/j.ijmachtools.2005.02.003

E. Brinksmeier, D. Meyer, A.G. Huesmann-Cordes, et al. Metalworking fluids—Mechanisms and performance[J]. CIRP Annals - Manufacturing Technology, 2015. DOI: https://doi.org/10.1016/j.cirp.2015.05.003

Osama M, Singh A, Walvekar R, et al. Recent developments and performance review of metal working fluids[J]. Tribology International, 2017, 114:389-401.

Xavior M A, Adithan M. Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel[J]. Journal of Materials Processing Technology, 2009, 209(2):900-909. DOI: https://doi.org/10.1016/j.jmatprotec.2008.02.068

Khandekar S, Sankar M R, Agnihotri V, et al. Nano-Cutting Fluid for Enhancement of Metal Cutting Performance[J]. Materials and Manufacturing Processes, 2012, 27(9):963-967. DOI: https://doi.org/10.1080/10426914.2011.610078

Yan T, Zhang Y, Yan S, Quan Y. Mechanism analysis of magnetic field in wastewater treatment [J]. Science and technology innovation, 2019 (26): 57-58

Li W. Study on the influence of ultrasonic, magnetic and electric field treatment on the germination vigor of soybean seeds [J]. Agricultural research and application, 2017 (06): 21-25

Chen X. Experimental study on the cooling and lubricating properties of magnetized emulsion [D]. Harbin University of technology, 2008

Li X. Influence of blade shape and emulsion treatment on the machinability of GH4169 [D]. Harbin University of technology, 2011

Yin Q, Li C, Zhang Y, et al. Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel [J]. The International Journal of Advanced Manufacturing Technology. 2018, 97, 129-145.

Zhao M. Basic research on size effect of micro milling [D]. Nanjing University of Aeronautics and Astronautics, 2014.

Shaw M C.Metal Cutting Principles [M]. second Edition. Oxford University Press,2005.

Guo S, Li C, Zhang Y, et al. Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension[J]. Industrial Crops and Products, 2018, 111:494-505. DOI: https://doi.org/10.1016/j.indcrop.2017.11.024

Published
2020-11-19
How to Cite
Yang, Y., Hu, G., Liang, W., Jin, K., Xiong, L., & Hou, S. (2020). STUDY ON MAGNETIZATION TREATMENT AND CUTTING PERFORMANCE OF A NEW-TYPE OF TRIETHANOLAMINE BORATE CUTTING FLUID. International Journal of Engineering Technologies and Management Research, 7(11), 17-29. https://doi.org/10.29121/ijetmr.v7.i11.2020.800