ANALYSIS OF A MODIFIED GROUND PLANE MICROSTRIP PATCH ANTENNA USING CO-AXIAL FEED
A wandered probe-fed rectangular microstrip patch antenna (RMPA) with rectangular slots on a finite ground plane with dielectric material substrate (4.4) is proposed in this paper. The proposed antenna finite ground plane dimension is only 18mm x 21mm. The simulated result shows two distinct resonant frequencies at 4.5 and 9.5 GHz. A 10-dB wide-impedance bandwidth of 1000 MHz and 4100 MHz ranging from 3.8-4.8 GHz and 5.9–10 GHz is achieved. The proposed antennas have achieved wider bandwidth (51.3%) with reasonable gain (4 dBi).
A. Balanis, “Antenna Theory, Analysis and Design,” John Wiley & Sons, New York, 1997.
B. Ahamadi, R. F. Dana, “A miniaturised monopole antenna for ultra-wideband applications with band notch filter,” IET Microwave antennas Propagations, vol.3, 2009, pp.1224-123. DOI: https://doi.org/10.1049/iet-map.2008.0323
Chen, W. L., G. M. Wang, and C. X. Zhang, “Bandwidth enhancement of a microstrip line fed printed wide-slot antenna with a fractal shaped slot,” IEEE Transactions on Antennas Propagation, Vol. 57, No. 7, 2176-2179,2009. DOI: https://doi.org/10.1109/TAP.2009.2021974
A.A. Deshmukh, K.P. Ray, “Compact Broadband Slotted Rectangular Microstrip Antenna,” Published in IEEE Antennas and Wireless Propagation Letters, 2009. DOI: https://doi.org/10.1109/LAWP.2010.2040061
Kim, H., and C.-W. Jung, “Bandwidth enhancement of CPW fed tapered slot antenna with multi transformation characteristics,” Electronics Letters, Vol. 46, No. 15, 1050-1051, 2010. DOI: https://doi.org/10.1049/el.2010.1624
Trang Dang Nguyen, Dong Hyun Lee, and Hyun Chang Park, “Design and Analysis of Compact Printed Triple Band-Notched UWB Antenna,” IEEE Antennas And Wireless Propagation Letters, Vol. 10, 2011. DOI: https://doi.org/10.1109/LAWP.2011.2147270
Bimal Garg, Rahul Tiwari, Ashish Kumar and Sunil Kumar Thakur, “Design of Broadband Rectangular Microstrip Patch Antenna Inset 'L' Shaped Feed with Rectangular 'L' Slots in Ground Plane,” International Journal of Computer Applications Volume 29 Number 1(ISBN: 978-93-80864-72-0) 1-4, September 2011. DOI: https://doi.org/10.5120/3532-4818
Abhishek, K., R. Sharma, and S. Kumar, “Bandwidth enhancement using the Z-shaped defected ground structure for a microstrip antenna,” Microwave and Optical Technology Letters, Vol. 55, 2251-2254, 2013. DOI: https://doi.org/10.1002/mop.27836
Rawat, S. and K. K. Sharma, “A compact broadband microstrip patch antenna with a defected ground structure for C-band applications,” Central European Journal of Engineering, Vol. 4, 287-292, 2014. DOI: https://doi.org/10.2478/s13531-013-0162-1
Mourad, M. and M. Essaaidi, “A dual ultra-wideband slotted antenna for C and X-band application,” Progress In Electromagnetics Research Letters, Vol. 47, 91-96, 2014. DOI: https://doi.org/10.2528/PIERL14052103
Samsuzzaman, M. and M.T. Islam, “Inverted S-shaped compact antenna X-band applications,” The Scientific World Journal, Vol. 14, 1-11, 2014. DOI: https://doi.org/10.1155/2014/604375
Rahul Tiwari, Seema Verma, and Archana Sharma, “Proposed a compact multiband and broadband rectangular microstrip patch antenna for C-band and X-band,” International Journal of Computer and Technology, vol. 13, no. 3, pp. 4293-4301, April 2014.
Nivedita Girase, Rahul Tiwari, Archana Sharma and Hema Singh, “Design and simulation of slotted rectangular microstrip patch antenna,” International Journal of Computer Applications, vol. 103, no.17, pp. 19-23, October 2014. DOI: https://doi.org/10.5120/18294-9264
Jamshed A. Ansari, Sapna Verma, Mahesh K. Verma and Neelesh Agrawal, “A Novel Wide Band Microstrip-Line-Fed Antenna with Defected Ground for CP Operation,” Progress In Electromagnetics Research C, Vol. 58, 169-181, 2015. DOI: https://doi.org/10.2528/PIERC15052305
Rahul Tiwari, Seema Verma, and Archana Sharma, “Design and analysis of multi-band rectangular microstrip patch antenna for C band and X band applications,” International Journal of Scientific & Engineering Research, vol. 6, issue 10, October-2015.
Rahul Tiwari, Seema Verma, Archana Sharma and Ashok Kumar, “Design and analysis of a compact microstrip antenna using shorting pin for 5 GHz band,” IEEE International conference on computer, communications and electronics, 1-2 July 2017. DOI: https://doi.org/10.1109/COMPTELIX.2017.8004054
Copyright (c) 2018 Rahul Tiwari, Dr. Ashish Bagwari, Dr. Vivek Singh Kushwah, Abhishek Senger
This work is licensed under a Creative Commons Attribution 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section