TO STUDY AND SIMULATION OF DUAL BAND H SHAPED RECTANGULAR MICROSTRIP PATCH ANTENNA USING VARIOUS PARAMETER

  • Saima Tabassum Mansoori M.Tech (Student), Microwave Engineering, Department of Electronics & Communication Engineering, S.R.I.T. Jabalpur (M.P.), India
  • Prof. Rahul Koshta Professor, Department of Electronics & Communication Engineering, S.R.I.T. Jabalpur (M.P.), India
Keywords: Substrate Height, Simulation, S- Parameter

Abstract

The substrate which is the first step in designing a patch antenna. Teflon (dielectric constant = 1.33 and height = 3.6 mm) are used as subs for the purpose of designing of Dual Band H Shaped Rectangular Microstrip Patch Antenna. The dimension of patch, ground plane, feed line width, inset notch etc. the design have important effects on the impedance matching.

Downloads

Download data is not yet available.

References

A. Batra, “Design of multiband OFDM system for realistic UWB channel environments,” IEEE Trans. Microwave Theory and Techniques, vol. 52, pp. 2123–2138, Sep. 2004.

A. Batra, “Multiband OFDM physical layer proposal for IEEE 802.15 task group 3a,” July 2003.

L. H. Weng, An Overview on Defected Ground Structure, Progress In Electromagnetics Research 173–189, 2008 DOI: https://doi.org/10.2528/PIERB08031401

Lo, T.K. Microstrip antennas of high permittivity for personal communication, 253-256, 1997.

N. Ojaroudi, “Omni-Directional/Multi-Resonance Monopole Antenna for Microwave Imaging Systems”. 2012 IEEE. DOI: https://doi.org/10.1109/TELFOR.2012.6419419

Published
2017-10-31
How to Cite
Mansoori, S., & Koshta, R. (2017). TO STUDY AND SIMULATION OF DUAL BAND H SHAPED RECTANGULAR MICROSTRIP PATCH ANTENNA USING VARIOUS PARAMETER . International Journal of Engineering Technologies and Management Research, 4(10), 119-122. https://doi.org/10.29121/ijetmr.v4.i10.2017.113