SUSTAINABLE MANUFACTURING CONCEPTS: A LITERATURE REVIEW

  • Priyanka Pathak Research Scholar, Mechanical Engineering Department Jagannath University Jaipur, India
  • Dr. M. P. Singh Professor, Mechanical Engineering Department Jagannath University Jaipur, India
Keywords: Literature Review, Sustainable Manufacturing Concepts, Correlation, Descriptive Analysis, Thematic Analysis

Abstract

Purpose – The purpose of this article is to review of literature on Sustainable Manufacturing Concepts. Method – Several frameworks are explored and discussed. Articles on the subject were searched and retrieved, and a content analysis was carried out. Their relationships include correlation, overlapping area, difference, integration and classification based on Sustainable Manufacturing Concepts dimensions. Total 78 research papers have been reviewed for the research contribution, methodologies, country of research, year of publication and different concepts of relevance. Results – This paper identifies major research gaps for sustainable manufacturing concepts through various aspects, thus allowing researchers to identify research opportunities. This paper provides a quantitative descriptive analysis and qualitative thematic analysis to provide an analysis on Sustainable Manufacturing Concepts. Conclusion – Many literature reviews that aim at discussions regarding sustainable manufacturing concepts but none of them focused exclusively on analysis of SM concepts through identification of various factors. Another unique feature of this paper is that total 78 key research papers have been reviewed. The time span taken for this review is about 24 years (1993-2016).

Downloads

Download data is not yet available.

References

MITTALV. et al.;(2016); “Two-way assessment of barriers to Lean–Green Manufacturing System: insights from India”; Int J Syst Assur Eng Manag; vol DOI: https://doi.org/10.1007/s13198-016-0461-z

GHANDEHARIUN A. et al.;(2016); “Sustainable manufacturing and its application in machining processes: a review” ; Int. J. Global Warming; Vol. 9, No. 2 DOI: https://doi.org/10.1504/IJGW.2016.074955

BHANOT N. et al.; (2015); “Enablers and Barriers of Sustainable Manufacturing: Results from a Survey of Researchers and Industry Professionals” Procedia CIRP 29 ( 2015 ) 562 – 567 DOI: https://doi.org/10.1016/j.procir.2015.01.036

METSON et al.;(2015); “Facilitators & barriers to organic waste and phosphorus re-use in Montreal”; Elementa: Science of the Anthropocene , 3: 000070 DOI: https://doi.org/10.12952/journal.elementa.000070

SANGWAAN K. et al.;(2015);” A bibliometric analysis of green manufacturing and similar frameworks”; Management of Environmental Quality: An International Journal, Vol. 26 Issue 4 pp. 566 – 587

Mançanares C. et al.;(2015); “Sustainable manufacturing strategies: a literature review on additive manufacturing approach”; Product: Management & Development, Vol. 13

Hartini S. et al.;(2015);” The relationship between lean and sustainable manufacturing on performance: literature review”; Procedia Manufacturing 4 ( 2015 ) 38 – 45

GUPTA S.et al.;(2015);” Key Determinants of Sustainable Product Design and Manufacturing”; Procedia CIRP 26 ( 2015 ) 99 – 102

GUPTA S.et al.;(2015);” Analytic Hierarchy Process (AHP) Model for Evaluating Sustainable Manufacturing Practices in Indian Electrical Panel Industries” ;Procedia - Social and Behavioral Sciences 189 ,208 – 216 DOI: https://doi.org/10.1016/j.sbspro.2015.03.216

MITTAL V.et al.;(2014); “Modeling drivers for successful adoption of environmentally conscious manufacturing”; Journal of Modelling in Management, Vol. 9 Iss 2 pp. 127 – 140

MITTAL V.et al.;(2014); “Fuzzy TOPSIS method for ranking barriers to environmentally conscious manufacturing implementation: government, industry and expert perspectives”; Int. J. Environmental Technology and Management, Vol. 17, No. 1 DOI: https://doi.org/10.1504/IJETM.2014.059466

MITTAL V.et al.;(2014);” Development of a structural model of environmentally conscious manufacturing drivers”; Journal of Manufacturing Technology Management, Vol. Iss 8 pp. 1195 – 1208

MITTAL V.et al.;(2014);” Prioritizing Drivers for Green Manufacturing: Environmental, Social and Economic Perspectives”; Procedia CIRP 15 ( 2014 ) 135 – 140

MITTAL V.et al.;(2014);” Prioritizing Barriers for Green Manufacturing: Environmental, Social and Economic Perspectives”; Procedia CIRP 17 ( 2014 ) 559 – 564

NORDIN N. et al.;(2014);” Drivers and Barriers in Sustainable Manufacturing Implementation in Malaysian Manufacturing Firms”; Proceedings of the 2014 IEEE IEEM DOI: https://doi.org/10.1109/IEEM.2014.7058726

DEEPAK M. et al.;(2014);”Identification of Pressures, Barriers and Drivers for The Implementation of Green Supply Chain Management”; 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India

GARG D. et al.;(2014);” An Evaluation of Drivers in Implementing Sustainable Manufacturing in India: Using DEMATEL Approach”; International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering Vol:8, No:12

CALVO N. et al.;(2014);” A Dynamic Model for Construction and Demolition (C&D) Waste Management in Spain: Driving Policies Based on Economic Incentives and Tax Penalties”; Sustainability, 6, 416-435 DOI: https://doi.org/10.3390/su6010416

PUMPINYO S. et al.;(2014);” Investigation of Barriers and Factors Affecting the Reverse Logistics of Waste Management Practice: A Case Study in Thailand”; Sustainability, 6, 7048-7062 DOI: https://doi.org/10.3390/su6107048

MITTAL V.et al.;(2014);” Development of a model of barriers to environmentally conscious manufacturing implementation”; International Journal of Production Research, Vol. 52, No. 2, 584–594

RATHOD G. et al.;(2014);” Life Cycle Assessment and Simulation: Enablers of Sustainable Product Design”; International Journal of Research in Engineering and Technology, Volume: 03 Special Issue: 03 DOI: https://doi.org/10.15623/ijret.2014.0315161

CHEN L. et al.;(2014);” Manufacturing facility location and sustainability: A literature review and research agenda”; International Journal of Production Economics, (149), 154-163 DOI: https://doi.org/10.1016/j.ijpe.2013.05.013

KULATUNGA A. et al.;(2013);”Drivers and barriers to implement sustainable manufacturing concepts in Sri Lankan manufacturing sector”; 11th Global Conference on Sustainable Manufacturing

MITTAL V.et al.;(2013);” Assessment of hierarchy and inter-relationships of barriers to environmentally conscious manufacturing adoption”; World Journal of Science, Technology and Sustainable Development, Vol. 10 Iss 4 pp. 297 – 307

SINGH P. et al.;(2013);” Development and validation of performance measures for environmentally conscious manufacturing “;Int. J. Services and Operations Management, Vol. 14, No. 2 DOI: https://doi.org/10.1504/IJSOM.2013.051829

MITTAL V.et al.;(2013);” Comparison of Drivers and Barriers to Green Manufacturing:A Case of India and Germany”; 20th CIRP International Conference on Life Cycle Engineering, Singapore DOI: https://doi.org/10.1007/978-981-4451-48-2_118

AHN Y. et al.;(2013);” Drivers and barriers of sustainable design and construction: The perception of green building experience”; International Journal of Sustainable Building Technology and Urban Development, 4:1, 35-45 DOI: https://doi.org/10.1080/2093761X.2012.759887

ZAABI S. et al.;(2013);” Analysis of interaction between the barriers for the implementation of sustainable supply chain management”; International Journal of Advanced Manufacturing Technology,68(1-4):895-905 DOI: https://doi.org/10.1007/s00170-013-4951-8

GOVINDAN K. et al.;(2013);” Barriers analysis for green supply chain management implementation in Indian industries using analytic hierarchy process”; International Journal of Production Economics DOI: https://doi.org/10.1016/j.ijpe.2013.08.018

HAAPALA K. et al.;(2013);” A Review of Engineering Research in Sustainabie Manufacturing”; Journal of Manufacturing Science and Engineering, Vol. 135

MATHIYAZHAGAN K. et al.;(2013);” An ISM approach for the barrier analysis in implementing green supply chain management’; Journal of Cleaner Production DOI: https://doi.org/10.1016/j.jclepro.2012.10.042

XU L. et al.;(2013);” Multiple comparative studies of Green Supply Chain Management: Pressures analysis”; Resources, Conservation and Recycling 78, 26– 35 DOI: https://doi.org/10.1016/j.resconrec.2013.05.005

LUTHRA S. et al.;(2013);” Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique-An Indian perspective”; Journal of Industrial Engg and Mgmt,231-257

JOUNG C. et al.;(2013);” Categorization of Indicators for Sustainable Manufacturing”; http://www.researchgate.net/publication DOI: https://doi.org/10.1016/j.ecolind.2012.05.030

SINGH M. et al.;(2013);” Study the Effect of Advanced Manufacturing Technologies on Manufacturing Industries”; International Journal of Engineering and Management Research, Vol.-3, Issue-4

CROCKER R. et al.;(2012);” SME Perceptions of Low Carbon Options: Drivers, Barriers and Business Sector Differences”; Earth & E-nvironment 7: 232-259

MITTAL V.et al.;(2012);” Drivers and Barriers of Environmentally Conscious Manufacturing:A Comparative Study of Indian and German Organizations”; 19th CIRP International Conference on Life Cycle Engineering, Berkeley, 2012 DOI: https://doi.org/10.1007/978-3-642-29069-5_17

SANGWAAN K. et al.;(2012);” Stakeholders for environmentally conscious technology adoption: an empirical study of Indian micro, small and medium enterprises”; Int. J. Management and Decision Making, Vol. 12, No. 1 DOI: https://doi.org/10.1504/IJMDM.2012.051047

LUTHRA S. et al.;(2012);” Implementation of The Green Supply Chain Management in Manufaturing Industry in India Using Interpretive Structural Modeling Technique”; BPR Technologia : A Journal of Science, Technology & Management,vol1(1)

PAJUNEN N. et al.;(2012);” Drivers and Barriers in The Supply Chain – The Importance of Understanding The Complexity of Recycling in The Industrial System”; Xxvi International Mineral Processing Congress (Impc) 2012 Proceedings / New Delhi, India / 24 - 28 September 2012

EDITORIAL;(2012); ” Sustainable procurement: Past, present and future” Journal of Purchasing & Supply Management 18 (2012) 201–206

ZUBIR A. et al.;(2012);” The Development of Sustainable Manufacturing Practices and Sustainable Performance in Malaysian Automotive Industry”; Journal of Economics and Sustainable Development, Vol.3, No.7

CHIU M. et al.;(2012);” Review of Sustainable Product Design from Life Cycle Perspectives”; International Journal of Precision Engineering and Manufacturing Vol. 13, No. 7, pp. 1259-1272

SMITH L. et al.;(2012);” Steps towards sustainable manufacturing through modelling material, energy and waste flows”; International Journal of Production Economics, Vol 140,Issue 1,227-238 DOI: https://doi.org/10.1016/j.ijpe.2012.01.036

ROSEN M. et al.;(2012);” Sustainable Manufacturing and Design:Concepts, Practices and Needs”; Sustainability, 4, 154-174 DOI: https://doi.org/10.3390/su4020154

DESPEISSE M. et al.;(2012);” Modelling and Tactics for Sustainable Manufacturing: an Improvement Methodology”; Production Planning & Control: The Management of Operations, 23:5, 354-376

MITTAL V.et al.;(2011);” Development of an Interpretive Structural Model of Obstacles to Environmentally Conscious Technology adoption in Indian Industry”; Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International 383 Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany DOI: https://doi.org/10.1007/978-3-642-19692-8_66

AREVALO J. et al.;(2011);” Corporate social responsibility practices in India: approach, drivers, and barriers”; Social Responsibility Journal, Vol. 9 Iss 3 pp. 465-478

JINDAL A. et al.;(2011);” Development of an Interpretive Structural Model of Barriers to Reverse Logistics Implementation in Indian Industry”; Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International 383 Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany DOI: https://doi.org/10.1007/978-3-642-19692-8_77

RATHOD G. et al.;(2011);” Application of Qfd for Enabling Environmentally Conscious Design in An Indian Electric Car Manufacturing Organization”; ISBN: 978-981-08- 7721-7

MUDGAL R. et al.;(2010);” Modelling the barriers of green supply chain practices: an Indian perspective”; Int. J. Logistics Systems and Management, Vol. 7, No. 1 DOI: https://doi.org/10.1504/IJLSM.2010.033891

REUTER C . et al.;(2010);” Sustainable Global Supplier Management: The Role of Dynamic Capabilities in Achieving Competitive Advantage”; Journal of Supply Chain Management DOI: https://doi.org/10.1111/j.1745-493X.2010.03189.x

NAMBIAR A. et al.;(2010);” Challenges in Sustainable Manufacturing”; Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh, January 9-10, 2010

LEAHU S. et al.;(2010);” Sustainable Manufacturing – An Overview for Manufacturing Engineers”; Sustainable Manufacturing Consulting

MUDGAL R. et al.;(2009);” Greening the supply chain practices: an Indian perspective of enablers’ relationships”; Int. J. Advanced Operations Management, Vol. 1, Nos. 2/3 DOI: https://doi.org/10.1504/IJAOM.2009.030671

RAHIMIFARD S. et al.;(2009);” Barriers, drivers and challenges for sustainable product recovery and recycling”; International Journal of Sustainable Engineering, Vol. 2, No. 2 DOI: https://doi.org/10.1080/19397030903019766

BALAS D. et al.;(2008);” An international comparative analysis of sustainability transformation across seven universities”; International Journal of Sustainability in Higher Education Vol. 9 No. 3, pp. 295-316

KANNAN G. et al.;(2008);” Analysis and selection of green suppliers using interpretative structural modelling and analytic hierarchy process”; Int. J. Management and Decision Making, Vol. 9, No. 2 DOI: https://doi.org/10.1504/IJMDM.2008.017198

LUKEN R. et al.;(2008);” Drivers for and barriers to environmentally sound technology adoption by manufacturing plants in nine developing countries”; Journal of Cleaner Production 16S1 (2008) S67-S77

MONTALVO C. ;(2008);” General wisdom concerning the factors affecting the adoption of cleaner technologies: a survey 1990-2007”; Journal of Cleaner Production 16S1 (2008) S7-S13

SEURING S. et al.;(2008);” From a literature review to a conceptual framework for sustainable supply chain management”; Journal of Cleaner Production 16 (2008) 1699– 1710

HSU C. et al.;(2008);” Green supply chain management in the electronic industry”; Int. J. Environ. Sci. Tech., 5 (2), 205-216

STERLING S. et al.;(2008);” Higher education and ESD in England:a critical commentary on recent initiatives”; Environmental Education Research, Vol. 14, No. 4, DOI: https://doi.org/10.1080/13504620802344001

SEIDEL R. et al.;(2008);” Establishing Sustainable Manufacturing Practices in SMEs”; Environ. Sci. Technology

STEGER U. et al.;(2007);” The economic foundations of corporate sustainability “;Corporate Governance: The international journal of business in society, Vol. 7 Iss 2 pp. 162 - 177

VERGHESE K. et al.;(2007);” Environmental innovation in industrial packaging: a supply chain approach”; International Journal of Production Research, 45:18-19 DOI: https://doi.org/10.1080/00207540701450211

NOWOSIELSKI R. et al.;(2007);” Methodology and tools of ecodesign”; Journal of Achievements in Materials and Manufacturing Engineering VOLUME 23 ISSUE 1 July 2007

BEERS D. et al.;(2007);” Industrial Symbiosis in the Australian Minerals Industry”; Journal of Industrial Ecology

SANGWAN K. et al.;(2006);” Performance Value Analysis for Justification of Green Manufacturing Systems”; Journal of Advanced Manufacturing Systems Vol. 5, No. 1,59– 73

SILVA N. et al.;(2006);” A New Comprehensive Methodology for the Evaluation of Product Sustainability at the Design and Development Stage of Consumer Electronic Products”; 13th CIRP International Conference on Life Cycle Engineering

Maxwell D. et al.;(2006);” Enabling Sustainable Development through sustainable consumption and production”; Int. J. Environment and Sustainable Development, Vol. 5, No. 3 DOI: https://doi.org/10.1504/IJESD.2006.010894

SHEATE W. et al.;(2006);” Functional and systems aspects of the sustainable product and service development approach for industry”; Journal of Cleaner Production

MIHELCIC J. et al.;(2003);” Sustainability Science and Engineering: The Emergence of a New Metadiscipline”; Environmental Science & Technology / Vol. 37, No. 23

KRAJNC D. et al.;(2003);” Indicators of sustainable production”; Clean Technology Environ Policy 5 , 279–288 DOI: https://doi.org/10.1007/s10098-003-0221-z

EPSTEIN M. et al.;(2001);” Sustainability in Action: Identifying and Measuring the Key Performance Drivers”; Long Range Planning DOI: https://doi.org/10.1016/S0024-6301(01)00084-X

LOGLISCI G. et al.;(2000);” Development of sustainable manufacturing indicators focusing on human work and environment”; Recent Advances in Energy, Environment and Financial Planning

JOHANSSON G. et al.;(1999);” Success Factors for Integration of Eco design in Product Development Ð A Review of State-of-the-art”; Environ. Sci. Technology

BHARDWAJ S. et al.; (1993); “Sustainable Competetive Advantages in Service Industries-A Conceptual Model and Research Propositions”; Journal of Marketting

Published
2017-06-30
How to Cite
Pathak, P., & Singh, M. (2017). SUSTAINABLE MANUFACTURING CONCEPTS: A LITERATURE REVIEW. International Journal of Engineering Technologies and Management Research, 4(6), 1-13. https://doi.org/10.29121/ijetmr.v4.i6.2017.74