INFLUENCE OF MOLDING METHOD ON PRODUCTS MADE OF MAGNESIA BINDER

  • Igor Shumakov Civil engineering, Kharkiv National University of Civil engineering and Architecture, Ukraine
  • Аssaad Мoustapha Civil engineering, Kharkiv National University of Civil engineering and Architecture, Ukraine
  • Basheer N. Younis Civil engineering, Kharkiv National University of Civil engineering and Architecture, Ukraine
Keywords: Caustic Magnesite, Vibrovacuumizing, Vibration, Compression, Molding

Abstract

This paper presents effect vibrovacuumizing (vibration+vacuum) on the strength of magnesia binder. The specimens were prepared at the water-cement ratio of 0.8 and they were tested at 1, 3, 7 days of curing. Some interesting results were obtained from the test of different method forming

Downloads

Download data is not yet available.

References

Shand M. A. (2006). The Chemistry and Technology of Magnesia, Wiley, New York. DOI: https://doi.org/10.1002/0471980579

Vandeperre L. J. & Al-Tabbaa A. (2007). Accelerated carbonation of reactive magnesia cements, ICE Journal of Advances in Cement Research. Vol. 19, No. 2, pp. 67‒79.

Сторожук Н.А. (1979) Механизм уплотнения бетонных смесей вакуумированием. Известия вузов: Строительство и архитектура, №2, c.72‒76. (In Russian).

Скрамтаев Б.Г. (1938). Вакуумирование бетона. Строительная промышленность, №3, c. 64‒ 72. (In Russian).

Evacuation of concrete construction experience in the United States. Moskow, text book, 1947, 15 p.

Storozhuk N.A. (2012). Theoretical studies on the evacuation of concrete mixes. Bulletin of Prydniprovs’ka State Academy of Civil Engineering and Architecture. – Dnipropetrovsk, Pdaba, № 2‒3, p. 32–38.

Published
2019-01-31
How to Cite
Shumakov, I., МoustaphaА., & Younis, B. (2019). INFLUENCE OF MOLDING METHOD ON PRODUCTS MADE OF MAGNESIA BINDER . International Journal of Engineering Technologies and Management Research, 6(1), 94-97. https://doi.org/10.29121/ijetmr.v6.i1.2019.349