STEADY MHD SLIP FLOW OVER A PERMEABLE STRETCHING CYLINDER WITH THERMAL RADIATION
Aim of the paper is to investigate the effects of thermal radiation and velocity slip on steady MHD slip flow of viscous incompressible electrically conducting fluid over a permeable stretching cylinder saturated in porous medium in the presence of external magnetic field. The governing nonlinear partial differential equations are transformed into ordinary differential equations by suitable similarity transformation and solved numerically using Runge-Kutta fourth order method with shooting technique. Effect of various physical parameters on fluid velocity, temperature, skin –friction coefficient and Nusselt number are presented through graphs and discussed numerically.
 Gupta, P.S. and Gupta, A.S. (1977). Heat and mass transfer on a stretching sheet with suction and blowing. The Canadian Journal of Chemical Engineering, 55, 744-756.
 Lin, H.T. and Shih, Y.P. (1980). Laminar boundary layer heat transfer along static and moving cylinders. Journal of the Chinese Institute of Engineers, 3, 73–79.
 Lin, H.T. and Shih, Y.P. (1981). Buoyancy effects on the laminar boundary layerheat transfer along vertically moving cylinders. Journal of the Chinese Institute of Engineers, 4, 47–51.
 Grubka, L.G. and Bobba, K.M. (1985). Heat transfer characteristics of a continuous stretching surface with variable temperature. The ASME Journal of Heat Transfer, 107, 248–250.
 Chen, C.K. and Char, M.I. (1988). Heat transfer of a continuous stretching surface with suction or blowing. Journal of Mathematical Analysis and Applications, 135(2), 568–580.
 Wang, C.Y. (1998). Fluid flow due to a stretching cylinder. Physics of Fluids, 31(3), 466–468.
 Ali, M.E. (1994). Heat transfer characteristics of a continuous stretching surface. Heat Mass Transfer, 29(4), 227–234.
 Anderson, H.I. (2002). Slip flow past a stretching surface. Acta Mechanica, 158, 121–125.
 Wang, C.Y. (2002). Flow due to a stretching boundary with partial slip-an exact solution of the Navier–Stokes equations. Chemical Engineering Sciecnce, 57, 3745–3747.
 Ariel, P.D., Hayat, T. and Asghar, S. (2006). The flow of an elastico-viscous fluidpast a stretching sheet with partial slip. Acta Mechanica, 187, 29–35.
 Fang, T., Zhang, J. and Yao, S. (2009). Slip MHD viscous flow over a stretching sheet – An exact solution. Communications in Nonlinear Science and Numerical Simulation, 14, 3731–3737.
 Ganesan, P. and Loganathan, P. (2003). Magnetic field effect on a moving vertical cylinder with constant heat flux. Heat Mass Transfer, 39, 381–386.
 Cortell, R. (2005). Flow and heat transfer of a fluid through a porousmedium over a stretching surface with internal heat generation/absorption and suction/blowing. Fluid Dynamics Research, 37(4), 231–45.
 Elbarbary, E.M.E. and Elgazery, N.S. (2005). Flow and heat transfer of a micropolar fluid in an axisymmetric stagnation flow on a cylinderwith variable properties and suction (numerical study). Acta Mechanica, 176, 213–229.
 Xu, H. and Liao, S.J. (2005). Series solutions of unsteady magnetohydrodynamics flows of non-Newtonian fluids caused by an impulsively stretching plate. Journal of Non-Newtonian Fluid Mechanics, 129, 46–55.
 Hayat, T., Abbas, Z. and Sajid, M. (2006). Series solution for the upper-convected Maxwell fluid over a porous stretching plate. Physics Letters A, 358, 396–403.
 Ishak, A., Nazar, R. and Pop, I. (2008). Uniform suction/blowing effect on flow and heat transfer due to a stretching cylinder. Applied Mathematical Modeling, 32(10), 2059–2066.
 Ishak, A. and Nazar, R. (2009). Laminar boundary layer flow along a stretching cylinder. European Journal of Scientific Research, 36(1), 22–29.
 Ishak, A., Nazar, R. and Pop, I. (2008). Magnetohydrodynamic (MHD) flow and heat transfer due to a stretching cylinder. Energy Conversion and Management, 49, 3265–3269.
 Mukhopadhyay, S. (2013). MHD boundary layer slip flow along a stretching cylinder. Ain Shams Engineering Journal, 4, 317–324.
 Mukhopadhyay, S. (2011). Chemically reactive solute transfer in aboundary layer slip flow along a stretching cylinder. Frontiers of Chemical Science and Engineering, 5(3), 385–391.
 Hayat, T., Saeed, Y., Asad, S. and Alsaedi, A. (2018). Convective heat and mass transfer in flow by an inclined stretching cylinder. Journal of Molecular Liquids, 220, 573–580.
 Merkin, J. H., Najib, N., Bachok, N., Ishak, A. and Pop, I. (2017). Stagnation-point flow and heat transfer over an exponentially stretching/shrinking cylinder. Journal of the Taiwan Institute of Chemical Engineers, 74, 65–72.
 Yu, S., Yu, P. and Tang, T. (2018). Effect of thermal buoyancy on flow and heat transfer around a permeable circular cylinder with internal heat generation. International Journal of Heat and Mass Transfer, 126, 1143–1163.
 Sinha, S. and Yadav, R.S. (2021). Steady MHD mixed convection Newtonian fluid flow along a vertical stretching cylinder embedded in porous medium. International Journal of Engineering Technologies and Management Research, 8(7), 45-57.
Copyright (c) 2021 Sharad Sinha, Deepak Kumar, Anil Sharma
This work is licensed under a Creative Commons Attribution 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section