EXPERIMENTAL STUDY AND ANALYSIS OF WEAR IN SHEET METAL DURING VARIOUS FORCES
Keywords:Friction, Wear, Sheet Metal Thickness
Sheet metals are metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metal working and it can be cut and bent into a variety of shapes. Countless everyday objects are constructed with sheet metal. Thicknesses can vary significantly; extremely thin thicknesses are considered foil or leaf, and pieces thicker than 4 mm are considered plate.
A. Ramalho, Study of the relationships friction – contact stresses using load scanner tests, in: Proceedings 11th Nordic Symposium on Tribology – NORDTRIB2004, 2004, pp. 699–707.
Andrey V. Gnatov,, Pulsed electromagnetic attraction of nonmagnetic sheet metals , Journal of Materials Processing Technology 214 (2014) pp390– 401 DOI: https://doi.org/10.1016/j.jmatprotec.2013.09.018
B.H. Lee, Y.T. Keum, R.H. Wagoner, Modeling of the friction caused by lubrication and surface roughness in sheet metal forming, J. Mater. Process. Technol. 130–131 (2002)pp 60–63. DOI: https://doi.org/10.1016/S0924-0136(02)00784-7
B. Podgornik, S. Hogmark, O. Sandberg, Influence of surface roughness and coating type on the galling properties of coated forming tool steel, Surf. Coat. Technol. 184 (2004) pp338–348. DOI: https://doi.org/10.1016/j.surfcoat.2003.11.002
B. Podgornik, S. Hogmark, J. Pezdirnik, Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces, Wear 257 (2004) pp843–851. DOI: https://doi.org/10.1016/j.wear.2004.05.005
B. Podgornik, S. Hogmark, O. Sandberg, V. Leskovsek, Wear resistance and anti-sticking properties of duplex treated forming tool steel, Wear 254 (2003) pp1113–1121. DOI: https://doi.org/10.1016/S0043-1648(03)00322-3
B. Podgornik, S. Hogmark, Surface modification to improve friction and galling properties of forming tools, J. Mater. Process. Technol. 174 (2006)pp 334–341. DOI: https://doi.org/10.1016/j.jmatprotec.2006.01.016
D.D. Olsson, N. Bay, J.L. Andreasen, Int. J. Surf. Sci. Eng. 4 (1) (2010)pp 2–12. DOI: https://doi.org/10.1504/IJSURFSE.2010.029625
E. Rabinowicz, Friction and Wear of Materials, 2nd ed., John Wiley & Sons, 1995.
Hyunok Kim, Ji Hyun Sung, Rajesh Sivakumar, Taylan Altan, Evaluation of stamping lubricants using the deep drawing test, Int. J. Mach. Tool Manuf. 47 (2007) pp2120– 2132. DOI: https://doi.org/10.1016/j.ijmachtools.2007.04.014
Hongying Gong, Zhonling Lou, Zhiling Zhang, Studies on the friction and lubrication characteristics in the sheet steel drawing process, J. Mater. Process. Technol. 151 (2004) pp328–333. DOI: https://doi.org/10.1016/j.jmatprotec.2004.04.082
J.H.C. de Souza, M. Liewald, Analysis of the tribological behaviour of polymer composite tool materials for sheet metal forming, Wear 268 (2010) pp241–248. DOI: https://doi.org/10.1016/j.wear.2009.07.017
How to Cite
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its release has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Authors who publish with International Journal of Engineering Technologies and Management Research agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
For More info, please visit CopyRight Section