CRITERIA FOR ASSESSING THE COST OF MANUFACTURING PROCESSES AND YOU EFFECTIVITY

Authors

  • Ing.Darina Matisková PhD., MBA Technical University of Kosice Faculty of Manufacturing Technologies with a seat in Presov Department of Industrial Engineering and Informatics, Bayerova 1, 08001 Presov Slovac Republic

DOI:

https://doi.org/10.29121/ijetmr.v5.i9.2018.282

Keywords:

Effectivity, Production Cost, Economic Reasons, Optimizing, Machining

Abstract

The aim of this paper is to theoretically evaluate the process of machining metallic materials and at the same time evaluate the cost reduction defined by the evaluation criteria. When cutting conditions and tool durability optimizing, it is necessary to apply certain optimizing criterion within certain restraining conditions. [12] The restrictions are given by technical parameters of a machine, tool, machined material, required quality of machined surface etc. The essential economic criterion is the amount of production cost. The notion of “machinability of materials” is a complex of characteristics of the machined material which is monitored in the view of its fitness for the production in a certain way of machining.

Downloads

Download data is not yet available.

References

BERGELIS, A. : Impact of collaborative manufacturing engineering on production variety and efficiency. 10th International Conference: New Ways in Manufacturing Technologies 2010, Prešov, pp. 95-102, ISBN 978-80-553-0441-0

HIRANO, H. : 5 Pillars of the visual workplace. Productivity Press, Portland, Oregon, 1998.

HOSHI, T. : High productivity machining research in Japan. Journal of Applied Metal Working 4 (3), 1986, pp. 226-237 DOI: https://doi.org/10.1007/BF02833930

LUXHOJ, J, T., RISS, J, O., THORSTEINSSON, U. : Trends and perspectives in industrial Maintenance Management. Journal of Manufacturing Systems vol. 16, 6/1997 DOI: https://doi.org/10.1016/S0278-6125(97)81701-3

MÁDL, J. : Computer – Aided determination of machining conditions. Science Report CEEPUS, Kielce 2010, pp.97-103. ISBN 978-83-88906-56-5

MÁDL, J., KVASNIČKA,J. : Optimalizace obráběcího procesu. Praha, ČVUT, 1998, 168

VASILKO, K., BOKUČAVA, G.: Technológia automatizovanej strojárskej výroby. Bratislava, ALFA, 1991, 275 s., ISBN 80-05-00806-6

VASILKO, K.: Analysis of the Impact of Cutting on Machining Process, Manufacturing Engineering, issue 1, year IX, 2010, pp 5-9

MATISKOVÁ, D., KOTUS, M. : Methodology for determining the cutting conditions in drilling of automated manufacturing. In Acta Universitatis Agriculture et Silviculturae Mendelianae Brunensis. ISSN 1211-8516, 2014, vol. 62, no. 5, s. 1033-1040. DOI: https://doi.org/10.11118/actaun201462051033

KOTUS, M., J - BREZINOVÁ, J. - GUZANOVÁ, A. : Application of hard surfacing for repairing of agricultural parts. In Research in agricultural engineering. ISSN 1212-9151, 2013, vol. 59, no. 2, s. 61-67. DOI: https://doi.org/10.17221/4/2012-RAE

KOTUS, M., MATISKOVÁ, D. MURA, L. : Impact of technological factors on dosing of metal at die-casting. In Advanced Materials Research. ISSN 1022-6680, 2013, vol. 801, special iss., p. 143-149. DOI: https://doi.org/10.4028/www.scientific.net/AMR.801.143

MATISKOVÁ D., : Automatic of component production and minimization economics of costs / - 2016. In: International Journal of Engineering and Technical Research (IJETR). Vol. 4, no. 3 (2016), p. 20-23. - ISSN 2454-4698.

Downloads

Published

2018-09-30

How to Cite

Matisková, I. (2018). CRITERIA FOR ASSESSING THE COST OF MANUFACTURING PROCESSES AND YOU EFFECTIVITY . International Journal of Engineering Technologies and Management Research, 5(9), 7–13. https://doi.org/10.29121/ijetmr.v5.i9.2018.282